micheal150

My Feedback: (2)

Hello every one. This build I've been working on from a week ago. Replace stock chassis with a low center gravity chassis I pick up from Ebay for under $100.00 dollars. Installed Kershaw Design Revolver 700 motor conversion from a ready to run E-Maxx, that I got from Ebay for $160.00 dollars. Also install front and rear spool lockers from the same truck. The chassis I bought also had the Robison Racing slipper clutch upgrade on the transmission, that came with the chassis upgrade. Install RPM shock towers on front and rear. Install RPM skid plates, that came from the ready to run truck as well. Installed 23 mm hub conversion from Pro Line Racing. 23 mm Cheyenne or Commache wheels from Pro Line Racing. 40 series Moab XL tires from Pro Line. Traxxas EVX speed controller made by Novak. Hitec Lynx 3D radio system. Hitec DCX dual conversion receiver. Cirrus CS-60 Ball Bearing, Metal Gear servo. Installed battery boxes from old E-Maxx crawler I had. Which is not show in my early photos, that I did. I hope every one enjoy this as much as I do. The truck has killer launch take off from stand still!

mikeeh

I think your truck is awesome! Next I would attempt to devise a new motor mount that would attach the motors from the other side and lower them to allow just enough clearance for the batteries in order to lower the center of gravity. Very cool truck! Thanks for posting pics!