Drift Meister
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: , WI
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Drift Meister
Put a drift meister motor in my sprint 2 drfit, worked fine before. Now it seems as if the power is inconsistant. One minute it will have tons, next minute it can barely move. Bad esc maybe? Any help is appreciated.
#4
Senior Member
Join Date: Jun 2009
Location: Rustenburg, SOUTH AFRICA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
RE: Drift Meister
sounds to me like the brushes isnt making constant contact with the comm. advice would be to check the brush springs, and inspect the comm. might just be something small, like a sticky brush, or the comm needs cleaning or a cut
#6
Banned
Join Date: Sep 2010
Location: Northampton,
MA
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
RE: Drift Meister
ORIGINAL: rasper
sounds to me like the brushes isnt making constant contact with the comm. advice would be to check the brush springs, and inspect the comm. might just be something small, like a sticky brush, or the comm needs cleaning or a cut
sounds to me like the brushes isnt making constant contact with the comm. advice would be to check the brush springs, and inspect the comm. might just be something small, like a sticky brush, or the comm needs cleaning or a cut
#8
Senior Member
Join Date: Oct 2010
Location: Aurora, CO
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
RE: Drift Meister
ORIGINAL: plasmaedge
check springs, brushes, comm, windings, and also check where the brush connects to the motor leads, it may be loose or a bad connection.
check springs, brushes, comm, windings, and also check where the brush connects to the motor leads, it may be loose or a bad connection.