thehuntingterminator

What are some good airbrush kits to start off with for like painting bodies and such? I was looking at Badger's stuff, but everything seems expensive. I am willing to spend up to $150 or maybe a little over for a really good setup. Thanks for the help.

The Mad Modder

Can't go wrong with badger. Paasche is good, too. Myself, I'm looking into a badger 200, but if you plan on doing custom art, you'd probably want a double action.

thehuntingterminator

well, i mean i'm not gonna do anything too cray, just paint a few bodies and maybe sell them if i get good enough. so can you suggest any specific models?

proanti1

My Feedback: (2)

Check out the Towerhobbies scratch & dent section, you can get the compressors for like 50% off retail.

SyCo_VeNoM

if you need a compressor just look at your local hardware store.
I got my 2 gallon compressor setup for like $65, and paid $30 for my badger airbrush kit(and $5 for the hose adapter). I got a badger 250-3 though. Its decent enough for simple work. Just don't go expecting to do fine details if you get it.

thehuntingterminator

i have like a 5 gallon compressor for like airing up tires, air ratchets, etc. would it work?

electricrc68

all i use is those little spray cans. of course, i don't do anything crazy and i don't plan on selling them.

proanti1

My Feedback: (2)

Yes, if it has a decent regulator that can be turned down to about 20psi.

airbrushNC

My Feedback: (9)

Badger 150, the pro kit will have 3 needles. Any large compressor will be fine, but it needs a accurate regulater. You can get a budget Airbrush with quite compressor from harbor freight very cheaply and they do a good job.  I use only the med needle for everything expect liquid mask. I have an Aztec all metal that is a super easy to use airbrush.<div>
</div><div>Double action is the only way to go. Invest into a few extra cups with your purchase, it will make your like easier.</div>

GALAXY

Harbor Freight, if you have one near you,go check it out.

I just picked up my airbrish from there for $11.99,the small hose for $8.99 and the adaptor fitting to go to a regular old compressor for $1.99.

This thing is 100X better than my Wal-mart Testors kit with the can of propellant,but that is all I have to compare it to.I've never used a $100+ airbrush.

I'll post pics and part numbers if you're interested.