DX10T
#1
Thread Starter
My Feedback: (33)
Join Date: Jan 2002
Location: Calgary Alberta,
AB, CANADA
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
DX10T
I have a question about the new DX10T, as I'm thinking of buying this radio. I have looked in the on line manual but can't see a snap roll function does anyone know of a way to program this function?
#2
RE: DX10T
Yes.
Use one mix for each control surface. Use a 3-position switch and you can make it snap left, normal flight, or snap right. You'll need to adjust the amount of travel you want for the snap.
The momentary switches on the DX18 are only on the sticks, so it's hard to push them while controlling the sticks (for me, anyway). That's what makes the 3-pos neat because you can make it go either way.
NOTE: On these radios you can mix a switch directly to a channel, you don't need to assign it to a channel first.
Andy
Use one mix for each control surface. Use a 3-position switch and you can make it snap left, normal flight, or snap right. You'll need to adjust the amount of travel you want for the snap.
The momentary switches on the DX18 are only on the sticks, so it's hard to push them while controlling the sticks (for me, anyway). That's what makes the 3-pos neat because you can make it go either way.
NOTE: On these radios you can mix a switch directly to a channel, you don't need to assign it to a channel first.
Andy