X-Mount/Hardware:Power 32/46/60 bolt size
#1
Thread Starter
My Feedback: (5)
Join Date: Jul 2005
Location: Omaha,
NE
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
X-Mount/Hardware:Power 32/46/60 bolt size
I just purchased an E-Flight X-Mount/Hardware:Power 32/46/60 electric motor mount. I also need to purchase standoffs for it. I would like to know what size the outer bolt holes are that mount to the firewall so I can order the right size of standoffs. I tried Horizon Hobbies customer support and they have no idea. I tried the place where I ordered the mount and they couldn't tell me. Anyone out there have this mount and can measure it for me? Thanks.
#2
Senior Member
RE: X-Mount/Hardware:Power 32/46/60 bolt size
The normal to firewall mounting screws are 4-40, per the E-Flite DHC-2 Beaver manual.
Depending on the ARF model, you may end up making the holes larger.
See the ARF Alpha 40 trainer manual, which also shows standoffs, and drill out details.
Manuals are downloadable or for viewing at Horizon's web site.
Depending on the ARF model, you may end up making the holes larger.
See the ARF Alpha 40 trainer manual, which also shows standoffs, and drill out details.
Manuals are downloadable or for viewing at Horizon's web site.
#3
Thread Starter
My Feedback: (5)
Join Date: Jul 2005
Location: Omaha,
NE
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
RE: X-Mount/Hardware:Power 32/46/60 bolt size
I got the mount in and the mounting hardware is 6-32 bolts that mounts to the firewall. The e-flight part number is EFLM40462 for the xmount that fits the G46 Turnigy electric motor. Hope this helps others.