Help with my 2 channel radio receiver
09-04-2003, 11:44 PM
#1
Member
Thread Starter
My Feedback: (57)
Join Date: Jan 2002
Location: Kalamazoo,
MI
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Help with my 2 channel radio receiver
I have a Hobbico 2 channel AM receiver. The receiver says that it has a Battery Eliminator Circuit. The problem is I'm not sure how much voltage the receiver can take. Does anyone know if I can hook a 9.6 volt pack directly to it without burning it up?
Thanks Don
Thanks Don
09-26-2003, 07:45 PM
#3
Senior Member
Join Date: Oct 2002
Location: San Jose,
CA
Posts: 1,156
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help with my 2 channel radio receiver
Is it that the BEC is for electric usage such that if you have an ESC, you can power the receiver through the ESC without using a receiver battery pack?
If that is the case, you can't connect a 9.6v directly to the receiver. Receiver, I believe have a voltage input of 4.8 to 6.0v (?)
If that is the case, you can't connect a 9.6v directly to the receiver. Receiver, I believe have a voltage input of 4.8 to 6.0v (?)
