Foam brush with latex paint
#1
Thread Starter
My Feedback: (5)
Join Date: Jan 2002
Location: San Tan Valley,
AZ
Posts: 5,768
Likes: 0
Received 0 Likes
on
0 Posts
Foam brush with latex paint
Has anyone tried to apply latex paint with a foam brush. I mean the complete finish - not just ths first coats. I have used a foam brush on Nelsons System Three paint and I am quite satisfied with the results. I just wonder if it would work with latex.
#2
Senior Member
My Feedback: (4)
Join Date: Feb 2002
Location: Knoxville, TN
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
RE: Foam brush with latex paint
Yes..it will work...I've used it on MicaFilm and WorldTex..Will not stay on MonoKote
Is not fuel proof with glow fuel...is with gas.
I use windshield washer fluid to thin the latex...brush on each coat in a different direction in thin layers..
Dry between coats with a hair dryer..
Hope this helps..
Is not fuel proof with glow fuel...is with gas.
I use windshield washer fluid to thin the latex...brush on each coat in a different direction in thin layers..
Dry between coats with a hair dryer..
Hope this helps..