-Eric01-

Hallo,

I'm driving an E-Maxx 3905 with some tuning (including aluminium bulkheads). After doing some jumps a few days ago two of the suspension pins broke. Now I can't find any spare parts.These are the bulkheads: http://www.ebay.com/itm/ALUMINUM-FRO...item2a21550edf
The pins have a diameter of 3mm and are held in place by an e-clip on each side.

Thank you

Tashco27

I just busted the pins on my emaxx 3903. I have rpm a-arms and bulkheads. I bought the stock traxxas replacements and they fit. If I can find the package I will get you the number. If you didn't get new pins with the aluminum bulkheads they should work. I found it. Traxxas#5161. They have enough pins to do both front upper and lower arms. They are 3mm pins. The top are longer(70.5) then the boytom(63). The kit has both. Hope this helps. I have a few in hand if you can't find any

-Eric01-

Thanks, but these won't fit because they can be only used with plastic bulkheads such as the stock ones and the ones from RPM. I need pins with clips on the ends.

EDIT: I think I found them: http://www.lunsfordracing.com/mm5/me...ode=TRUC-TRTM3

cbaker65

Thats a good brand,I run those in my mgt.

-Eric01-

Available at TowerHobbies for ~$19. I really hope that those will fit because shipping will take 2 or 3 weeks to Austria and I won't be able to return them due to the high shipping costs back to the US.

Maxximize

Those Lunsford ones will fit perfectly. I use them on My T Maxx with ACNCM aluminum bulks with RPM A arms. There's actually a little room to spare even. They come with a few extra E clips, too.

-Eric01-

Sounds great, thank you!