looking for a new on-road help....
#1
Thread Starter
looking for a new on-road help....
Ok so i have nitro on roads but i dont have electric and i want an Electric one... SO what is the best, fastest, strongest rtr 1/10 out there???? is it better to get a kit?/ if so which one and what should i get for it? Um i dont want to go broke but i want a good car though. so like im at 350$??? is this possible?? but if i have to go up ill just save up more but whats best car for my needs??? Im just wanting to bash in parking lots and streets. and get speed runs and such. It also needs to have lots of upgrade parts available too...... please and ty!
#2
Senior Member
Join Date: Feb 2014
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Sakura xi sport($100)this holds the record on our local track and thats against xrays ae tourers 4x the cost.
Skyrc toro ts120 esc it includes program box turbo dynamic timing software ($85)and a ares 3.5t 9100kv motor ($50)gt2b flysky radio rx/tx lipo-charger($35)around $270
These are at rcmart.com you can veiw them there this would not include batt and charger for car and you may need to ask about shipping but you could take this setup to the podium anywhere against anyone
its quite cheap considering the xray t4s like $600 for chasis alone no elecs and still beat it in a race.with this motor on 2s lipo youre looking at around 60-80mph depending on gearing-or get a 5.5t ares and run 3s too over 100mph(yeeah booyee)thats just me man im full on 3s lipo lol.
this would be great all round basher on road although been belt drive may have to watchout for stoney areas but they are far more efficient than shaft for speed and handling
all the upgrades are real cheap too not that it needs any.try some drifting aswell maybe and get some tyres.
Skyrc toro ts120 esc it includes program box turbo dynamic timing software ($85)and a ares 3.5t 9100kv motor ($50)gt2b flysky radio rx/tx lipo-charger($35)around $270
These are at rcmart.com you can veiw them there this would not include batt and charger for car and you may need to ask about shipping but you could take this setup to the podium anywhere against anyone
its quite cheap considering the xray t4s like $600 for chasis alone no elecs and still beat it in a race.with this motor on 2s lipo youre looking at around 60-80mph depending on gearing-or get a 5.5t ares and run 3s too over 100mph(yeeah booyee)thats just me man im full on 3s lipo lol.
this would be great all round basher on road although been belt drive may have to watchout for stoney areas but they are far more efficient than shaft for speed and handling
all the upgrades are real cheap too not that it needs any.try some drifting aswell maybe and get some tyres.
Last edited by Next edition; 03-03-2014 at 01:18 AM.
#3
Senior Member
Join Date: Feb 2014
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Or you could just buy the kit and get you some cheaper elecs,even a good cheap second hand roller and new elecs try to get new elecs than you can trust its got heaps of life.
Last edited by Next edition; 03-03-2014 at 01:16 AM.
#7
Senior Member
Join Date: Feb 2014
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Yep its got instructions and program box which is a volt and rev meter pictured here,caps go on the same connectors as battery wires.
theres also a bluetooth module you can get for it so you can program with an android or iphone but the program box does the same thing too.
theres also a bluetooth module you can get for it so you can program with an android or iphone but the program box does the same thing too.
Last edited by Next edition; 03-03-2014 at 01:31 PM.
#8
Thread Starter
Do i need that capacitator thing??? can i just leave it aside? Is there another esc? That i could use? Is there any electronics i can get that doesnt envolve soldering? I mean i have a solder but i just want to buildit put in electronics plug it in and go like 70mph is there any combos? that can do that on a 2s? or 3s?
#10
Senior Member
Join Date: Feb 2014
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
For less high powered systems like the 60amp combos most come soldered,although its possible to get those speeds its alot harder on the elecs to do so,whethers the 120 amp setups are mostly all in need of been soldered up.
speed passion reventon 1.1 pro probably the best available $160 down from $290
there are others but They need soldering I only source from these guys because ive tested there stuff and it only takes a week to wait in the maill
ebay and key word beeman x10 v.3($130 free shipped ww)120amp esc-6.5t turbo function etc.etc.
just needs the motor wires soldered and goes awesome heres mine ive had it for about 4mnths in a losi xxx-s I dont know how long it might take but from hong kong it took a week to get here to new zealand not sure about america.
speed passion reventon 1.1 pro probably the best available $160 down from $290
there are others but They need soldering I only source from these guys because ive tested there stuff and it only takes a week to wait in the maill
ebay and key word beeman x10 v.3($130 free shipped ww)120amp esc-6.5t turbo function etc.etc.
just needs the motor wires soldered and goes awesome heres mine ive had it for about 4mnths in a losi xxx-s I dont know how long it might take but from hong kong it took a week to get here to new zealand not sure about america.
Last edited by Next edition; 03-03-2014 at 06:25 PM.
#11
For less high powered systems like the 60amp combos most come soldered,although its possible to get those speeds its alot harder on the elecs to do so,whethers the 120 amp setups are mostly all in need of been soldered up.
speed passion reventon 1.1 pro probably the best available $160 down from $290
there are others but They need soldering I only source from these guys because ive tested there stuff and it only takes a week to wait in the maill
ebay and key word beeman x10 v.3($130 free shipped ww)120amp esc-6.5t turbo function etc.etc.
just needs the motor wires soldered and goes awesome heres mine ive had it for about 4mnths in a losi xxx-s I dont know how long it might take but from hong kong it took a week to get here to new zealand not sure about america.
speed passion reventon 1.1 pro probably the best available $160 down from $290
there are others but They need soldering I only source from these guys because ive tested there stuff and it only takes a week to wait in the maill
ebay and key word beeman x10 v.3($130 free shipped ww)120amp esc-6.5t turbo function etc.etc.
just needs the motor wires soldered and goes awesome heres mine ive had it for about 4mnths in a losi xxx-s I dont know how long it might take but from hong kong it took a week to get here to new zealand not sure about america.
#12
My Feedback: (10)
Lucianpoppy, you have to watch the dates on threads you pull up. For example this one is a year old and next edition hasnt been on here in a year.
Which combo did you get? Can you link it. If its the one I think you may be pleasantly surprised.
Which combo did you get? Can you link it. If its the one I think you may be pleasantly surprised.
#14
Lucianpoppy, you have to watch the dates on threads you pull up. For example this one is a year old and next edition hasnt been on here in a year.
Which combo did you get? Can you link it. If its the one I think you may be pleasantly surprised.
Which combo did you get? Can you link it. If its the one I think you may be pleasantly surprised.
not sure if last reply would notify you so did it again, but here is what came with it , ( sakura XI sport)
#15
My Feedback: (10)
I saw that combo, the motor should be smokin fast. Specs on the servo are decent too. The rx tx combo is compatible with flysky (probably a rebranded flysky) which is what a lot of guys are using these days. The tx doesnt have a lot of bells and whistles but it should work just fine.
#16
I saw that combo, the motor should be smokin fast. Specs on the servo are decent too. The rx tx combo is compatible with flysky (probably a rebranded flysky) which is what a lot of guys are using these days. The tx doesnt have a lot of bells and whistles but it should work just fine.