Help with Xicoy Telemetry2 configuration
#1
Thread Starter
My Feedback: (1)
Join Date: Mar 2002
Location: Oakland, CA
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Help with Xicoy Telemetry2 configuration
I have a Xicoy Telemetry2 adaptor that I would like to configure to connect a Jet Speed sensor to my Futaba Sbus2 receiver. Anyone know how to do this? Do I need another device to do the configuration?
#2
Replying to a rather old thread:
All the telemetry adapter does is translate the serial data output from the ECU to a format the receiver can handle to transmit back to the transmitter.
To get speed data the ECU must supply that info to the adapter.
If the ECU does not have a speed/pitot lead then you need something else to produce that data.
On my setup (note I do not use Futaba), I used the Xicoy Flight computer (FC) to generate both GPS and Speed telemetry data which is fed directly to the telemetry receiver.
Originally I purchased a telemetry adapter, but found that since I had the flight computer, it served no purpose in that particular jet.
I moved it to a different plane where it talks to the ECU directly.
Hookup information is found here: Microsoft Word - Telemetry5 en vermell.doc (xicoy.com)
All the telemetry adapter does is translate the serial data output from the ECU to a format the receiver can handle to transmit back to the transmitter.
To get speed data the ECU must supply that info to the adapter.
If the ECU does not have a speed/pitot lead then you need something else to produce that data.
On my setup (note I do not use Futaba), I used the Xicoy Flight computer (FC) to generate both GPS and Speed telemetry data which is fed directly to the telemetry receiver.
Originally I purchased a telemetry adapter, but found that since I had the flight computer, it served no purpose in that particular jet.
I moved it to a different plane where it talks to the ECU directly.
Hookup information is found here: Microsoft Word - Telemetry5 en vermell.doc (xicoy.com)
Last edited by opjose; 06-14-2021 at 08:29 PM.