mitchilito

My Feedback: (7)

I have a K80 G2 and absolutely nowhere can I find out how to read the total runtime on the engine. Can anyone help?

BarracudaHockey

My Feedback: (11)

Plug the GSU in and and turn it on.

mitchilito

My Feedback: (7)

First, let me say thanks for taking the time to answer my post. With that said, this is the Kingtech ECU. When I power up the GSU I get do not get hour data.

What am I missing?

BarracudaHockey

My Feedback: (11)

I don't have a KT handy but in one of the menus, it might be TEST, there's a Total Time and Last Run time. I'd have do drag my F18 out of the trailer to check the exact sequence.

mitchilito

My Feedback: (7)

I'll go look around in the test menu. . . . .

Okay, I'm back from the test menu and this is what I found. There are 9 menu options and 1 of 9 says "TIMER" and on this engine is says "0091min". Below that there appears to be a last event timer, which mine happens to be 64 seconds.

The guy I bought this from told me it had "less than 5 hours on it" but 1.5 hours seems really low. I'm wondering if I'm seeing the total time. . . .

BarracudaHockey

My Feedback: (11)

91 minutes is the total time

mitchilito

My Feedback: (7)

Thanks BH!