Naruke / hui yang advantage bipe ep
#1
Thread Starter
My Feedback: (1)
Naruke / Hui Yang Advantage Bip ep
Between the lockdown and the humid and windy spring we have in France now, i have time for an ADVANTAGE BIPE review.
Let's start with the specs, and the box arriving home ...
Souvenir of a friendly visit in JAPAN
KEN HIROSE and GIICHI NARUKE
UPS has a box for you
I let you appreciate the packaging !
Not a single scratch 👏👏
Thanks YANG YONG
Let's start with the specs, and the box arriving home ...
- Design by Giichi Naruke
- Wing span1770mm
- Fuselage length1985mm
- Wing area 92.6dm˛
- Horizon Stabilizer area 17dm˛
- Spinner diameter 82mm
- C.G130mm backward from the dowel of bottom wing
- Aileron servo Futaba BLS173sv x4
- Elevator servo Futaba BLS173sv x2
- Rudder servo Futaba BLS171sv x1
- Empty weight EP 2350g
Souvenir of a friendly visit in JAPAN
KEN HIROSE and GIICHI NARUKE
UPS has a box for you
I let you appreciate the packaging !
Not a single scratch 👏👏
Thanks YANG YONG
Last edited by J-P; 05-06-2021 at 06:32 AM.
The following 3 users liked this post by J-P:
#2
Thread Starter
My Feedback: (1)
Starting with a full inspection of the parts and record of the weights
Fuselage with Rudder and Canopy 1013 g
Top Wing 540 g
Bottom Wing 549 g
Left Stab 92 g
Right Stab 90 g
Struts and Wings bolts 52 g
Total weight 2.236 g
Really close to the announced weight on HUI YANG website ( 2350 g)
Time to make room on the workbench and start ...
Fuselage with Rudder and Canopy 1013 g
Top Wing 540 g
Bottom Wing 549 g
Left Stab 92 g
Right Stab 90 g
Struts and Wings bolts 52 g
Total weight 2.236 g
Really close to the announced weight on HUI YANG website ( 2350 g)
Time to make room on the workbench and start ...
The following users liked this post:
wattsup (05-08-2021)
#3
Thread Starter
My Feedback: (1)
Equipment
FUTABA T18 MZ / T 32
RX 7003
BLS 173 SVI Ailerons & Elevators
BLS 151 Rudder
ADVERRUN SINGLE DRIVE
D3 ESC
The landing gear legs with wheels pants and wheels weight 168 g
ADVERRUN plus D3 ESC 616 g
Batteries tray 31 g + 12 g
I start with the wings servos installation.
Paint is very fragile, and I use a foam protection when working on the surfaces.
I found useful using a carbon rod mounted on a plastic horn to position the horn parallel to the hinge line.
FUTABA T18 MZ / T 32
RX 7003
BLS 173 SVI Ailerons & Elevators
BLS 151 Rudder
ADVERRUN SINGLE DRIVE
D3 ESC
The landing gear legs with wheels pants and wheels weight 168 g
ADVERRUN plus D3 ESC 616 g
Batteries tray 31 g + 12 g
I start with the wings servos installation.
Paint is very fragile, and I use a foam protection when working on the surfaces.
I found useful using a carbon rod mounted on a plastic horn to position the horn parallel to the hinge line.
The following users liked this post:
wattsup (05-09-2021)
The following users liked this post:
big_G (05-12-2021)
#9
Thread Starter
My Feedback: (1)
Engine installation.
With the thick nose ring and the short ADVERRUN Drive shaft, I bolted directly the engine to the nose ring using the soft mounts.
As the air intake is small, the air exhaust on the bottom of the fuselage seems to be large enough.
KONTRONIK runs cool as well as the D3.
80 or 82 mm FALCON spinners are used with a 2 or 3 blades prop
With the thick nose ring and the short ADVERRUN Drive shaft, I bolted directly the engine to the nose ring using the soft mounts.
As the air intake is small, the air exhaust on the bottom of the fuselage seems to be large enough.
KONTRONIK runs cool as well as the D3.
80 or 82 mm FALCON spinners are used with a 2 or 3 blades prop
The following users liked this post:
shannah (05-15-2021)
#13
Thread Starter
My Feedback: (1)
Final installation
CK AERO tolls for perfect elevators adjustment
RX battery and switch plate
OPTIPOWER Optiguard for battery backup
Clamp filter (ferrite core) to reduce the effects of radio interference by FUTABA recommendation for 7003SB RX - TDK ZCAT1325-0530A
CK AERO tolls for perfect elevators adjustment
RX battery and switch plate
OPTIPOWER Optiguard for battery backup
Clamp filter (ferrite core) to reduce the effects of radio interference by FUTABA recommendation for 7003SB RX - TDK ZCAT1325-0530A
The following 3 users liked this post by J-P: