Motor Setup For Great Planes Siren Hot Liner
#2
Senior Member
My Feedback: (2)
Join Date: May 2005
Location: Tacoma, WA WA
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
RE: Motor Setup For Great Planes Siren Hot Liner
Turnigy 2450 1300 kv inrunner direct drive , a little over 700 watts , Turnigy plush 60 amp speed control , 30 - 40 c 4 cell lipo ,11x6 Graupner folding prop with turbo type spinner all from Hobbyking.
Other useless information just in case. Pulled from some of the other sites the guys are using.
A little hotter setup,
mega 22/30/3, Jeti 40, two 2100 thunderpower lipos, 9/7 folding cam
Axi 2826/10 , 14x9.5 prop and throw in a TP2100 or two
AXI 2820/10 with Hyperion 50ESC and two 11.1V Tanic 2200mah packs in parallel.
Other useless information just in case. Pulled from some of the other sites the guys are using.
A little hotter setup,
mega 22/30/3, Jeti 40, two 2100 thunderpower lipos, 9/7 folding cam
Axi 2826/10 , 14x9.5 prop and throw in a TP2100 or two
AXI 2820/10 with Hyperion 50ESC and two 11.1V Tanic 2200mah packs in parallel.
#3
My Feedback: (11)
Join Date: Jul 2005
Location: Cleveland, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
RE: Motor Setup For Great Planes Siren Hot Liner
What setup have you decided on with your Siren? I tried to find threads that Tinkerpilot referred to but even a search with "Siren" only produced your message. Where in Atlanta are you located?
#5
Junior Member
Join Date: Feb 2011
Location: landrum,
SC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: Motor Setup For Great Planes Siren Hot Liner
my maiden flight on my siren with a really hot landing still trying to get the spoilerons dialed in but my setup is listed on the bottom of the video feel free to comment !
http://www.youtube.com/watch?v=nguTUlbGGBg
thanks Jeremy
http://www.youtube.com/watch?v=nguTUlbGGBg
thanks Jeremy