Top RC Zero from Gator R/C
03-30-2024, 07:24 AM
#1126
The following users liked this post:
darod07 (03-30-2024)
05-01-2024, 08:49 PM
#1128
I am building a zero. Robart electric retracts with 5in robart wheels. The wheel is interfering with the gear door linkage? The gear door had pre-drilled holes for the control horn. Has anyone else experienced this?
05-02-2024, 02:03 AM
#1129
Just make new hole or try to bend linkage so it's not interfering. I didn't use TopRC solution of closing small flaps, made it servoless similiar as original plane had.
05-03-2024, 10:46 PM
#1131
Sometimes you just have to step away and reevaluate the problem. I was able to dremel the tip off the the gear door linkage and tweak the control rod. All is well now and working as it should.
The following users liked this post:
darod07 (05-03-2024)
06-09-2024, 06:26 AM
#1133
Made some good progress over the last few weeks. Has anyone designed the exhaust tips in CAD? The ones the kit comes with are not so hot. I started working on the design tonight, but don't want to re-invent the wheel! Props to whoever came up with the L brackets on the cooling fins... worked really well! And the cowl mounts to the baffles... really clean....:-)
The following users liked this post:
u2fast (09-16-2024)
The following users liked this post:
JosefCZ (09-20-2024)
10-02-2024, 05:07 PM
#1144
No, they are metric and bigger diameter. Could fix it with a proper lathe.
I have the opposite. Robart struts in TopRC retracts. the TopRC struts for the zero are simply garbage. Soft metal and way to heavy springs. Poor design on that bird. Bend now or bend later, they will all bend eventually on the Zero. All except the Robarts, the zero version are bulletproof.
Robart rules. Sad they stopped making retracts!!
I have the opposite. Robart struts in TopRC retracts. the TopRC struts for the zero are simply garbage. Soft metal and way to heavy springs. Poor design on that bird. Bend now or bend later, they will all bend eventually on the Zero. All except the Robarts, the zero version are bulletproof.
Robart rules. Sad they stopped making retracts!!
10-08-2024, 05:42 AM
#1145
No, they are metric and bigger diameter. Could fix it with a proper lathe.
I have the opposite. Robart struts in TopRC retracts. the TopRC struts for the zero are simply garbage. Soft metal and way to heavy springs. Poor design on that bird. Bend now or bend later, they will all bend eventually on the Zero. All except the Robarts, the zero version are bulletproof.
Robart rules. Sad they stopped making retracts!!
I have the opposite. Robart struts in TopRC retracts. the TopRC struts for the zero are simply garbage. Soft metal and way to heavy springs. Poor design on that bird. Bend now or bend later, they will all bend eventually on the Zero. All except the Robarts, the zero version are bulletproof.
Robart rules. Sad they stopped making retracts!!
The following users liked this post:
bradley (10-18-2024)
