What plane???
#2
Member
Join Date: Dec 2001
Location: PUNTA GORDA FL
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
What Plane?
What level pilot are you? Beginner or advanced pilot. Just a guess, 70 to 80". You can't go wrong with an Extra 300 or 100" Cub. Give us something to go on...Jim
#3
Thread Starter
Join Date: Feb 2002
Location: Beirut, LEBANON
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
What plane???
I've been scratch building and flying lots of
models for about 6 yrs now...!
Maximum size is a scratch built suhkoi for a 90 FS engine...
would love to have a big scale one....
What about the Sopwith Pup fom Balsa USA???
Regards
Hisham.
models for about 6 yrs now...!
Maximum size is a scratch built suhkoi for a 90 FS engine...
would love to have a big scale one....
What about the Sopwith Pup fom Balsa USA???
Regards
Hisham.
#5
Thread Starter
Join Date: Feb 2002
Location: Beirut, LEBANON
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
What plane???
Thanks for the reply pilotrc....
Still searching, did you see the SE5a of Dynaflite,
love this model, however; i am searching for a bigger one
maybe the Flybaby.... Don't know....
need opinions!!
I've been looking also at the midwest Extra 300XS...
Still searching, did you see the SE5a of Dynaflite,
love this model, however; i am searching for a bigger one
maybe the Flybaby.... Don't know....
need opinions!!
I've been looking also at the midwest Extra 300XS...
#6
Senior Member
My Feedback: (3)
Join Date: Feb 2002
Location: Macho Grande, KS
Posts: 1,590
Likes: 0
Received 0 Likes
on
0 Posts
What plane???
The 35 would be ideal in the 1/4 scale Pup or Neuport. I've got a
35 Quadra (same engine) in an 82" sport plane like the Stinger
but with a double taper wing. It pulls the plane fine but is not
super snappy to do the 3D stuff. Another good kit would be the
Super Cub from DynaFlite. If you build any plane light to fit in the
12 to 14 lb. range, the 35 would work. If you do ARF's, the new
Great Planes 1/3 Pitts would fly alright but not at neck breaking
speed. This would be at more scale speed than what the current
pilots seem to like. One more ARF would be the H9 Taylorcraft.
Randy
35 Quadra (same engine) in an 82" sport plane like the Stinger
but with a double taper wing. It pulls the plane fine but is not
super snappy to do the 3D stuff. Another good kit would be the
Super Cub from DynaFlite. If you build any plane light to fit in the
12 to 14 lb. range, the 35 would work. If you do ARF's, the new
Great Planes 1/3 Pitts would fly alright but not at neck breaking
speed. This would be at more scale speed than what the current
pilots seem to like. One more ARF would be the H9 Taylorcraft.
Randy