Machined Homemade out runner motor..
#1
Thread Starter
My Feedback: (1)
Machined Homemade out runner motor..
Well.. after a few month now... my friend bought a complete system of cnc machine... and have been working his butt off for this... we dream to make our own motor.. and part... it finally pay off. I got the motor from him today.. and a few touch up and winding... my mouth droped open...
Here are some quick spec.. more will be update later..
Im estimating, close.. .but not exact..
Complete motor diamter is 28mm
Stator diamter = 22.5mm
Stacked 2 stator
Magnet = 1.5mm (6 pole)
13 Turn (Star style)
Weight = roughly 35-40 gram
Here is one pix... i will take some more quality pix later... it night time here right now...
here u can compare it to the graupner speed 300 brushed motor... the diamter are a bit more bigger.. but it shorter...
This motor can run the zoom very good... and for other micro like humming bird and aerohawk ect.. there will be some single stator... if you're interested in a custom made one.. you can pm me..
Here are some quick spec.. more will be update later..
Im estimating, close.. .but not exact..
Complete motor diamter is 28mm
Stator diamter = 22.5mm
Stacked 2 stator
Magnet = 1.5mm (6 pole)
13 Turn (Star style)
Weight = roughly 35-40 gram
Here is one pix... i will take some more quality pix later... it night time here right now...
here u can compare it to the graupner speed 300 brushed motor... the diamter are a bit more bigger.. but it shorter...
This motor can run the zoom very good... and for other micro like humming bird and aerohawk ect.. there will be some single stator... if you're interested in a custom made one.. you can pm me..