Phoenix 25 setup in Shogun/Zoom
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: loudon, TN
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Phoenix 25 setup in Shogun/Zoom
Hi, looking to go brushless in my shougn. Have a Himax 2025 with 10t pinion and a phoenix 25 esc ready to install. I know there are serveal settings to program into the speed controller. Could someone tell me what settings they are using. Thanks
1 Current limiting ?
2 Brake type- I do know that this one is off.
3 Throttle type?
4 Timing advance?
5 Cutoff type ?
6 Soft start?
1 Current limiting ?
2 Brake type- I do know that this one is off.
3 Throttle type?
4 Timing advance?
5 Cutoff type ?
6 Soft start?
#2
My Feedback: (11)
Join Date: Jul 2002
Location: Gulf Coast
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
RE: Phoenix 25 setup in Shogun/Zoom
9.1 option 1(never ever want the motor to stop running due to low batt voltage
9.2 option 4 (insensitive)
9.3 option 5 (no brake)
9.4 option 1
9.5 option 2 (standard timing)
9.6 option 2 (doesn't matter really)
9.7 option 1 (very soft start)
9.2 option 4 (insensitive)
9.3 option 5 (no brake)
9.4 option 1
9.5 option 2 (standard timing)
9.6 option 2 (doesn't matter really)
9.7 option 1 (very soft start)