Some pics of my H9 33% edge.
#3
Junior Member
My Feedback: (24)
Join Date: Jan 2005
Location: Belvidere,
NJ
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some pics of my H9 33% edge.
cool, a guy at my field let me fly his with a DA 100 in it and it was BALISTIC! Your gonna have a blast with this combo. Best of luck.
-Saucy-
-Saucy-
#4
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: DES RUISSEAUXQu颥c, CANADA
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some pics of my H9 33% edge.
ORIGINAL: TeamZenoah3D
cool, a guy at my field let me fly his with a DA 100 in it and it was BALISTIC! Your gonna have a blast with this combo. Best of luck.
-Saucy-
cool, a guy at my field let me fly his with a DA 100 in it and it was BALISTIC! Your gonna have a blast with this combo. Best of luck.
-Saucy-
Wow you lucky Can't wait!!
#6
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: DES RUISSEAUXQu颥c, CANADA
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some pics of my H9 33% edge.
Hi Geist,
The bubble bag are here to avoid the flat spots on the wheels. Its winter here and my planes will sit
in the garage for another 3 months at least.
Serge
The bubble bag are here to avoid the flat spots on the wheels. Its winter here and my planes will sit
in the garage for another 3 months at least.
Serge
#7
Senior Member
Join Date: Nov 2002
Location: Crete,
IL
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some pics of my H9 33% edge.
I use a length of 4" (or whatever the tire diameter is) PVC pipe cut in half. Set the wheels into the half pipe and they will stay perfectly round no matter how long it sits. Flat spotted tires drive me nuts.[sm=spinnyeyes.gif]
#8
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: DES RUISSEAUXQu颥c, CANADA
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some pics of my H9 33% edge.
ORIGINAL: Stick Jammer
I use a length of 4" (or whatever the tire diameter is) PVC pipe cut in half. Set the wheels into the half pipe and they will stay perfectly round no matter how long it sits. Flat spotted tires drive me nuts.[sm=spinnyeyes.gif]
I use a length of 4" (or whatever the tire diameter is) PVC pipe cut in half. Set the wheels into the half pipe and they will stay perfectly round no matter how long it sits. Flat spotted tires drive me nuts.[sm=spinnyeyes.gif]
Oh man that's a pretty damn good tricks!!!
Thanks for sharing!
#9
Senior Member
My Feedback: (9)
Join Date: Jan 2002
Location: Pine Bluff, AR,
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some pics of my H9 33% edge.
Some pics from the field yesterday. I had to cut out the cowl a little more than most on mine because I have alot of insulation tape on the plug wires and they aren't very flexible but I added some coaming to the cut outs so it looks OK anyway.