Dubro or Rocket City-What goes where?
01-25-2005, 12:32 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: Sydney, AUSTRALIA
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Dubro or Rocket City-What goes where?
I'm sure this is unimportant, but with the hardware pack supplied by WH, there are 2 sets of Rocket City horns, and 1 of dubro.
Does it matter which set goes where?
Hiding the mounting screws is easier with the rocket city.
Any advice from the guru's is greatfully received!!!
Does it matter which set goes where?
Hiding the mounting screws is easier with the rocket city.
Any advice from the guru's is greatfully received!!!
01-25-2005, 07:33 AM
#2
Senior Member
My Feedback: (61)
Join Date: Jul 2003
Location: **,
NJ
Posts: 4,741
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dubro or Rocket City-What goes where?
The rocket city is for the ailerons and elevators and the Dubro should be for the rudder..If Im wrong someone wil set me straight!
01-25-2005, 04:03 PM
#4
Senior Member
Thread Starter
Join Date: Apr 2004
Location: Sydney, AUSTRALIA
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dubro or Rocket City-What goes where?
thanks both.
That was my thinking, but the thoughts of a madman tend not to carry too much weight!!
That was my thinking, but the thoughts of a madman tend not to carry too much weight!!
01-26-2005, 05:30 PM
#6
Senior Member
Join Date: May 2002
Location: Flower Mound (near Dallas),
TX
Posts: 6,189
Likes: 0
Received 2 Likes
on
2 Posts
RE: Dubro or Rocket City-What goes where?
The Dubro horns should be shortened so the pivot lines up with the hinge line, this will give you correct geometry and plenty of throw. You can make them shorter too if you don't care about the geometry.
TF
TF
