Water Based Contact Cement For Wing Sheeting
#1
Senior Member
Thread Starter
My Feedback: (15)
Join Date: Feb 2002
Location: SOBIESKI,
WI
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Water Based Contact Cement For Wing Sheeting
Does anyone know of a commercially available water based contact cement that can be used for sheeting foam surfaces?
Thanks
Tom
Thanks
Tom
#2
Senior Member
Join Date: Feb 2005
Location: Lady Lake,
FL
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Water Based Contact Cement For Wing Sheeting
Although not a contact type glue any of the alaphetic resins (carpenters glue) can be used and hold quite well. need alot of weight or vacuum bagging.
#3
My Feedback: (158)
Water Based Contact Cement For Wing Sheeting
Home Depot sells a Water-based Contact
I've used it allot for my cabinetwork.
Works well, just use it in higher temps other wise it takes a long time to set up
I actual prefer Carpenters glue, I thin it about 40% and apply a thin layer only to the foam, then let set up over night with about 50 lbs of weight on the saddles,, has never done me wrong
So cheap it should be illegal!!
I've used it allot for my cabinetwork.
Works well, just use it in higher temps other wise it takes a long time to set up
I actual prefer Carpenters glue, I thin it about 40% and apply a thin layer only to the foam, then let set up over night with about 50 lbs of weight on the saddles,, has never done me wrong
So cheap it should be illegal!!
#4
Member
Join Date: Apr 2003
Location: North Highland,ca
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Water Based Contact Cement For Wing Sheeting
Dave Brown make a glue for foam sheeting. But like was said
Elmer tan wood glue is good but air dry and if its vacuam baged
where is the air so I thin it with water 20:1 and let dry 3 coats then lite sealing low temp pretty good. CU
Elmer tan wood glue is good but air dry and if its vacuam baged
where is the air so I thin it with water 20:1 and let dry 3 coats then lite sealing low temp pretty good. CU
#6
My Feedback: (5)
Water Based Contact Cement For Wing Sheeting
Also, Elmer's Probond works great. Just spread it on THIN as it will expand some. This is good because it will fill small grooves and imperfections. A local builder of large/giant scale told me about this. Used it several times and works great.
#7
Senior Member
Join Date: Mar 2002
Location: Niceville, FL
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Water Based Contact Cement For Wing Sheeting
Dave Brown's Southern Shorgum works very well too. It's a true contact cement that does not require weights or vacuum bagging. It's much better than the "reformulated" 3M 77.
#8
Senior Member
Join Date: Jun 2002
Location: Baltimore, MD
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Water Based Contact Cement For Wing Sheeting
Northwest Hobby technologies sells a product called foam bond. Home Depot sells DAP weldwood in a green can. Titebond also make a water based contact cement. If you want an aerosol product the 3m 08074 is good for sheeting foam with balsa.