FUTABA S3003 STANDERD SERVO SPECIFICATIONS
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Detroit,
MI
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
FUTABA S3003 STANDERD SERVO SPECIFICATIONS
Hey,
I am working on a RF radio frequency project and i need the specifications for the motor inside the s3003 standerd servo. If anyone can help, please do so.
Thanks
I am working on a RF radio frequency project and i need the specifications for the motor inside the s3003 standerd servo. If anyone can help, please do so.
Thanks
#2
Join Date: Nov 2004
Location: St. Thomas, ON, CANADA
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUTABA S3003 STANDERD SERVO SPECIFICATIONS
From [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXH288&P=ML]tower[/link]
SPECS: Speed: .23sec/60 deg @ 4.8V or .19 sec/60 deg @ 6V.
Torque: 44 oz-in @ 4.8V or 56.8 oz-in @ 6V
(3.2kg/cm @ 4.8V or 4.1kg/cm @ 6V)
Size: 1.6"L x .8"W x 1.4"H (41x20x36mm) w/o output shaft
Weight: 1.3 oz (37.2g)
Connector: "J" type with approx. 5" lead
SPECS: Speed: .23sec/60 deg @ 4.8V or .19 sec/60 deg @ 6V.
Torque: 44 oz-in @ 4.8V or 56.8 oz-in @ 6V
(3.2kg/cm @ 4.8V or 4.1kg/cm @ 6V)
Size: 1.6"L x .8"W x 1.4"H (41x20x36mm) w/o output shaft
Weight: 1.3 oz (37.2g)
Connector: "J" type with approx. 5" lead
#3
Senior Member
Join Date: Jan 2004
Location: KLN, HONG KONG
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUTABA S3003 STANDERD SERVO SPECIFICATIONS
ORIGINAL: evaderguy89
Hey,
............ the specifications for the motor inside the s3003 standerd servo............
Thanks
Hey,
............ the specifications for the motor inside the s3003 standerd servo............
Thanks
If I'm correct, the motor is RF-020 ..... http://www.mabuchi-motor.co.jp/engli...set/set_1.html
...
Some internal details os the S3003 here .... http://www.seattlerobotics.org/encod...09/S3003C.html
.
#4
Senior Member
Join Date: Jan 2004
Location: KLN, HONG KONG
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
RE: FUTABA S3003 STANDERD SERVO SPECIFICATIONS