The best .26 enigne for Savage
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2004
Location: Bridgeton, NJ
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
The best .26 enigne for Savage
I have the Savage SS and im going to began racing and the Max enigne size is .26 my truck have the .25 so is it worth goin up one notch? plus I need anything that will give me the edge...lol
#4
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2004
Location: Bridgeton, NJ
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: The best .26 enigne for Savage
Whats the specs on it This engine nevered cross my mind but its in the fast truck so I think I should get it.....
ORIGINAL: BIzzED
XTM 24.7 PRO [>:][sm=thumbup.gif]
XTM 24.7 PRO [>:][sm=thumbup.gif]
#6
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2004
Location: Bridgeton, NJ
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: The best .26 enigne for Savage
OK...hmm this is going to be hard
Mach .26 HP 2.75
Picco .26 Outlaw HP 2.7
XTM 24.7 HP unknown (but this engine powers the fastest Monster truck)
Mach .26 HP 2.75
Picco .26 Outlaw HP 2.7
XTM 24.7 HP unknown (but this engine powers the fastest Monster truck)
#7
Senior Member
My Feedback: (1)
Join Date: Feb 2004
Location: Richmond,
VA
Posts: 4,000
Likes: 0
Received 0 Likes
on
0 Posts
RE: The best .26 enigne for Savage
Shouldn't be too hard... the Mach and the XTM are both made by SH, and both share the same performance features (knife-edged rod, turbo porting[cuts] in the end of the crank, etc.) so the >displacement should be a no-brainer. If you have to have a .26 get the Mach. The Picco 26 makes a little more power down low, but the Mach isn't far behind and has a broader powerband. I would choose the 24.7Pro over the Picco26 also to be honest...
#8
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2004
Location: Bridgeton, NJ
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: The best .26 enigne for Savage
Ok so Mach .26 it is...im going to order one today...Hopefully I can fix my Front diff and break in the Mach by Sat. to start racing.....
#9
Senior Member
Join Date: Oct 2004
Location: , SK, CANADA
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
RE: The best .26 enigne for Savage
or what are your oppinions on this mach .26 vs the SH .28? thinking about buying a new motor but everyone has so many different oppinions
#10
RE: The best .26 enigne for Savage
ORIGINAL: JEXTEL
I have the Savage SS and im going to began racing and the Max enigne size is .26 my truck have the .25 so is it worth goin up one notch? plus I need anything that will give me the edge...lol
I have the Savage SS and im going to began racing and the Max enigne size is .26 my truck have the .25 so is it worth goin up one notch? plus I need anything that will give me the edge...lol
Depending on what your tuning experience level is, let me give you one good tip, if you are a little new to tuning, absolutely STAY AWAY from the Picco .26, a powerhouse engine, but a nightmare tuning the low speed circut. My #1 suggestion for the best overall power AND ease of tuning is the XTM 24.7 Pro. I have 6 engines, and the XTM ranks #1.
Rich
#11
My Feedback: (2)
Join Date: Feb 2005
Location: Jacksonville, FL
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
RE: The best .26 enigne for Savage
I have both the Mach and the SH - The mach has more RPM and the SH has a bit more torque. For general bashing I would pick the SH as torque is most desireable and makes wheelies really easy.
The Mach runs great and is easy to tune, everyone with an LST loves 'em. The RPMs run higher than with the SH, so racing would probably be a bit better suited to the Mach.
The Mach runs great and is easy to tune, everyone with an LST loves 'em. The RPMs run higher than with the SH, so racing would probably be a bit better suited to the Mach.