BF109 Retracts
01-04-2002, 01:31 AM
#1
Senior Member
Thread Starter
My Feedback: (3)
Join Date: Dec 2001
Location: Gonzales,
LA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
BF109 Retracts
I just got a set of prototype retracts for my 100in BF109 from Darryl Tenny(Sierra Precision Components). He has been good enough to help design a set, because NOBODY other than CJ made a set.This pic shows the CJ unit on the left and Darryls unit on the right.You have to disassemble the CJ unit and custom grind the cam to achieve the retract angle required as it comes to you at 90 degrees and you need roughly an 80 degree angle. Thats a quarter in the middle for size.
01-05-2002, 10:19 AM
#5
Join Date: Dec 2001
Location: Brunswick, OH
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Pricing
The unit that is shown in the previous picture is a prototype.
Cost for the unit will be in the $400.00 range.
Contact Sierra Precision if you need additional pricing or other info.
800-927-4530
Thanks,
Darrell
Cost for the unit will be in the $400.00 range.
Contact Sierra Precision if you need additional pricing or other info.
800-927-4530
Thanks,
Darrell
