sirio27 low speed problem
#1
Member
Thread Starter
Join Date: Jun 2004
Location: titi, NB, CANADA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
sirio27 low speed problem
Hi guys,
Trying to break in the engine with trinity #8 plug & 20% fuel. All factory needle setting.
Beginning, hard to start the engine, problem solved by giving more throttle.
idle needle is in proper position, must give throttle to keep the engine runing.
what's this problem ? please give some ideas.
Thanks for any replies...
Trying to break in the engine with trinity #8 plug & 20% fuel. All factory needle setting.
Beginning, hard to start the engine, problem solved by giving more throttle.
idle needle is in proper position, must give throttle to keep the engine runing.
what's this problem ? please give some ideas.
Thanks for any replies...
#2
Senior Member
Join Date: Feb 2005
Location: Your Mom,
WA
Posts: 1,031
Likes: 0
Received 0 Likes
on
0 Posts
RE: sirio27 low speed problem
i am in the process of breaking in a sirio 27. and the factory settings for break in are way too fat. lean the low speed needle untill it will idle and then idle a tank keeping it running by blipping the throttle once in a while. after that tank you can lean up the top end a bit and proceed with your break in. i have 4 sirio 27s and that is what i did for all 4 of them