Voyager E Gear on Corona Info Needed
#1
Member
Thread Starter
Join Date: Sep 2002
Location: Wichita,Ks
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Voyager E Gear on Corona Info Needed
Hello All.
I am wanting to install the JR Voyager E Landing Gear
and Battery Holder on my LMH Corona but i can't seem to find
all the part(s) numbers i need for the complete gear/batt holder setup
Also, Does anyone have a link to a website that shows how to perform the mod ?
Thanks for the help
Mike
I am wanting to install the JR Voyager E Landing Gear
and Battery Holder on my LMH Corona but i can't seem to find
all the part(s) numbers i need for the complete gear/batt holder setup
Also, Does anyone have a link to a website that shows how to perform the mod ?
Thanks for the help
Mike
#2
Member
My Feedback: (2)
Join Date: Apr 2002
Location: Bemus Point,
NY
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Voyager E Gear on Corona Info Needed
do a search over on rcgroups.com for lots of information.
Basically you need to raise the rear up by about 1 1/8" to get the heli to sit level. I made a layup of carbon fiber cloth wrapped around an aluminum tube then saturated with epoxy to make a thin flat CF sheet. This bolts to the Corona crutch. Sorry no digital camera to take photos.
Others have just used some of the extra ply that came with the Corona to extend the rear.
Like I said lots of picts if you do a search on rcgroups.
Oh, parts numbers are there also.
i am not trying to send you away from rcuniverse. Just want to let you know there are lots of discussions there if you don't get the responses you need here.
Basically you need to raise the rear up by about 1 1/8" to get the heli to sit level. I made a layup of carbon fiber cloth wrapped around an aluminum tube then saturated with epoxy to make a thin flat CF sheet. This bolts to the Corona crutch. Sorry no digital camera to take photos.
Others have just used some of the extra ply that came with the Corona to extend the rear.
Like I said lots of picts if you do a search on rcgroups.
Oh, parts numbers are there also.
i am not trying to send you away from rcuniverse. Just want to let you know there are lots of discussions there if you don't get the responses you need here.