Help- loose ball joints on Blade CP
10-06-2005, 07:40 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Hobart, AUSTRALIA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Help- loose ball joints on Blade CP
hi guys, listen on my blade, which flys great by the way, i have noticed that the ball linkages between the main blades and the flybar is really quite loose it hasnt come off in flight yet but if i just tab it with my finger it will pop off, is there any way i can tighen this up without buying lots of new bits? could i dip the ball links in a bit of epoxy resin so they are bit thicker???? sugestions would be great!!!!!
here is a pic if your not sure what i mean.
www.rcpics.net/img/65986
here is a pic if your not sure what i mean.
www.rcpics.net/img/65986
10-06-2005, 11:33 PM
#2
Senior Member
Join Date: Apr 2003
Location: Phenix City,
AL
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help- loose ball joints on Blade CP
Those get loose on mine as welll, especially after having to take time off and on several times during adjustments, I just bought some more and am going to replace them and see if the new ones I got are tighter. seems the ball link are too small or the rod attachments are too big.
