Receiver for 36ch Walkera
#1
Junior Member
Thread Starter
Join Date: Dec 2005
Location: Sydney, AUSTRALIA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Receiver for 36ch Walkera
Hi,hoping someone out there could help me!!!!.Reveived a heli for chrissy but discovered the reveiver is all set up wrong.I am operating in mode 2 and need to connect all the servo's.Have tried following the instruction manual but found that...on the remote control the left hand stick is correct with the throttle and tail but on the right hand side when you move the stick left to right it made the nose go up and down when moving the stick up and down it was doing the body roll.How can change this to follow the instruction book??
#2
Senior Member
Join Date: Oct 2005
Location: N,
CA
Posts: 1,503
Likes: 0
Received 0 Likes
on
0 Posts
RE: Receiver for 36ch Walkera
Switch the servos plugs to the Rx, if the servo moves opposite direction, flip the dip switch at the back of the Tx, do it one at a time until you get it right.