Drivetrain help
#1
Senior Member
Thread Starter
Join Date: Dec 2005
Location: santa rosaamerica
Posts: 1,218
Likes: 0
Received 0 Likes
on
0 Posts
Drivetrain help
I have a associated mgt. I keep losing a pin that holds the driveshaft in place with the yoke. It is hard to describe so i added a picture. I have had to replace this a few times, when the screw falls out it becomes only Front Wheel Drive. Is there any tips on how i can keep this screw from falling out? Thanks Alot. Sorry the picture isn't that great.
#2
Senior Member
Join Date: Dec 2005
Location: NA, , NETHERLANDS
Posts: 4,194
Likes: 0
Received 0 Likes
on
0 Posts
RE: Drivetrain help
Try to mushroom the ends with a pair of needle nose pliers.
or
Use some epoxy to keep it from falling out.
or
Drill a small hole in the yoke and then use a bolt/nut combo.
or
Use some epoxy to keep it from falling out.
or
Drill a small hole in the yoke and then use a bolt/nut combo.