Set screw in rear diff case
#1
Thread Starter
Join Date: Sep 2003
Location: San Francisco,
CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Set screw in rear diff case
Gang,
What is the purpose of the set screw in the rear differential case? Im sure the front has one too but I have not rebuilt the front yet?
-Thanks
Chef
What is the purpose of the set screw in the rear differential case? Im sure the front has one too but I have not rebuilt the front yet?
-Thanks
Chef
#3
Senior Member
My Feedback: (3)
Join Date: Feb 2005
Location: Westmont, NJ
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Set screw in rear diff case
You will find that when you have to rebuild your diffs that the screw comes out and you slide the pin that holds the shaft that drives the center dogbones out through that hole to remove the shaft itself.
#5
Senior Member
My Feedback: (3)
Join Date: Feb 2005
Location: Westmont, NJ
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
RE: Set screw in rear diff case
You will find that when you have to rebuild your diffs that that screw comes out and you slide the pin that holds the shaft that drives the center dogbones out through the hole where the screw was to remove the shaft itself.
#6
Thread Starter
Join Date: Sep 2003
Location: San Francisco,
CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
RE: Set screw in rear diff case
my mistake...Im describing the wrong screw. Im talking about the set screw that is inside the diff case on the black plastic cup that houses the bevels gears.
Sorry for the confusion
Chef
Sorry for the confusion
Chef
#7
Member
Join Date: Dec 2005
Location: , VA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
RE: Set screw in rear diff case
I know what you are talking about. Its a very small screw in the diff case. I THINK it locks the rear diff. I tightened it down and I could not spin the diff. I am not EXACTLY sure what it's suppose to do. Maybe someone will chime in and let us all know!! I have the LE if that makes a diff. Still new and learning!! [8D]
TireDr
TireDr
#8
Senior Member
My Feedback: (2)
Join Date: Dec 2003
Location: Staten Island, NY,
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
RE: Set screw in rear diff case
ORIGINAL: chefboyrd
my mistake...Im describing the wrong screw. Im talking about the set screw that is inside the diff case on the black plastic cup that houses the bevels gears.
Sorry for the confusion
Chef
my mistake...Im describing the wrong screw. Im talking about the set screw that is inside the diff case on the black plastic cup that houses the bevels gears.
Sorry for the confusion
Chef