savage_newbie

What do i need to convert my 4.6ss spur to a steel hpi one ? please include links to towerhobbies

tmodlin

You will also need a hardened CB.

You can get this combo and it will tame down the wheelies and give you a little more top end.
http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXGGV4

Or if you want the stock gearing and have deeper pockets you can get these.
http://www2.towerhobbies.com/cgi-bin...&I=LXGXK0&P=ML
http://www2.towerhobbies.com/cgi-bin...?&I=LXHVD0&P=M

Dont forget the slipper pad and bearings if you need them too.

savage_newbie

thanks man for the help i have these items in the shopping cart

Robinson Racing Steel Combo 48T/16T Savage
http://www2.towerhobbies.com/cgi-bin...?&I=LXGGV4&P=6

HPI Bearing 5x10mm Proceed (2)
http://www2.towerhobbies.com/cgi-bin...?&I=LXPC91&P=V

HPI Metal Bushing 5x11x4mm
http://www2.towerhobbies.com/cgi-bin...?&I=LXM767&P=V


do i really need a slipper pad whats wrong with the stock one correct me if i am wrong in anything cus i am kinda of new to nitro

cheekyman

hi mate i have a 4.6 with a supercharger (yeah i know loads o money me) and what i found is best is (on ebayUK) a non slipper spur gear and very important a HARDENED clutch bell as this spur gear will strip all other clutch bells (the bloke selling the non slipper spurs sell the cbs also) why non slipper well i had probs with slipper on mine and it stopped me from wheeling

Timmahh

if your in a race situation you dont want it to wheelie. but if your bashing then nose up.
Timmahh