DF III / IV users
08-23-2006, 09:02 AM
#1
Member
Thread Starter
My Feedback: (2)
Join Date: Jul 2004
Location: Rochester,
NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
DF III / IV users
I have a DF IV, and this will also work on a DF III
I have been flying on 3S lipos for awhile now, But last night I tried a 2S lipo 7.4volt 1250mah, and was surprised to find the DF flew very well on only 7.4 volts.
There is enough power to fly around and the motors stay cooler also. I do not think there is enough power to lift any extra weight.
If you have the newer DF V board you have an auto cut off for 3S lipos, so if you want to try and use a 2S, you need to disable the Auto cutoff and I believe this is done right after power up with left or right stick movements...
I have been flying on 3S lipos for awhile now, But last night I tried a 2S lipo 7.4volt 1250mah, and was surprised to find the DF flew very well on only 7.4 volts.
There is enough power to fly around and the motors stay cooler also. I do not think there is enough power to lift any extra weight.
If you have the newer DF V board you have an auto cut off for 3S lipos, so if you want to try and use a 2S, you need to disable the Auto cutoff and I believe this is done right after power up with left or right stick movements...
