Fusion Kit - Landing gear size?
#1
Senior Member
Thread Starter
My Feedback: (27)
Join Date: May 2002
Location: Snellville, GA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Fusion Kit - Landing gear size?
I am going to order the Fusion 90 kit and built it myself. I was wondering what size is the landing gear that is included - 90 or GS? I had to replace my yak 65" l.G. with the GS size because of the way they give, especially in the summer heat. I also run a 17X6 APC on my Ys 110. So I need the extra clearance.
#2
Senior Member
Thread Starter
My Feedback: (27)
Join Date: May 2002
Location: Snellville, GA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fusion Kit - Landing gear size?
I stand corrected it was the 60 size that I replaced with the 90 size L.G. I hope the 90 size comes with the kit. Also are the 90 size kits in stock
#3
Senior Member
My Feedback: (9)
Join Date: Jun 2003
Location: Washington Court House,
OH
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fusion Kit - Landing gear size?
Hey Earl, Yup 90 size gear is what comes with the kits. Been working on getting the kits together this weekend, should have them back up on the web by Wednesday this week.
#4
Senior Member
Thread Starter
My Feedback: (27)
Join Date: May 2002
Location: Snellville, GA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fusion Kit - Landing gear size?
I take it that you work for OMP. Also that the Fusion 90 kits will be available this week? I plan on ordering on monday. Any tips besides the manual on building this kit. I have built 3 yak 64" 2 years ago.
Thanks!
Thanks!
#5
Senior Member
Thread Starter
My Feedback: (27)
Join Date: May 2002
Location: Snellville, GA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fusion Kit - Landing gear size?
I take it that you work for OMP. Also that the Fusion 90 kits will be available this week? I plan on ordering on monday. Any tips besides the manual on building this kit. I have built 3 yak 64" 2 years ago.
Thanks!
Thanks!
#6
Senior Member
My Feedback: (9)
Join Date: Jun 2003
Location: Washington Court House,
OH
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fusion Kit - Landing gear size?
Hey Earl, Yup I work there. The web site buttons will not be back on until tonight sometime. Of course you can call Vicki at 937-429-3056
As far as build tips go, the plane falls together! You should find it to be one of if not the easiest kits to build there is out there. The fuse pieces are laser cut/interlocking, the wing/rons build flat to the board, the tail group is all straight forward stuff, there really are no surprises along the way. Of course if you would have a question we are always right here and able to help.
As far as build tips go, the plane falls together! You should find it to be one of if not the easiest kits to build there is out there. The fuse pieces are laser cut/interlocking, the wing/rons build flat to the board, the tail group is all straight forward stuff, there really are no surprises along the way. Of course if you would have a question we are always right here and able to help.