Need a good, cheap dremel
#1
Senior Member
Thread Starter
Join Date: May 2006
Location: Overland Park, KS
Posts: 4,885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
OK, well I am tired of trying to use a drill as a dremel because it just doesn't work. So I am looking for a basic dremel but not the bes in the world because I only need something that will get the job done. So far the ones I am looking at are:
http://www.sears.com/sr/javasr/produ...cemldffidfjm.0
maybe just maybe one of these
http://www.sears.com/sr/javasr/produ...TOOL&ihtoken=1
http://www.sears.com/sr/javasr/produ...cemldffidfjm.0
Are there any other ones that are good and strong. I like craftsman, but this is rc. I would also like variable speed and cordless. The main one though is cordless.
This one doesn't look very bad http://www2.towerhobbies.com/cgi-bin...&I=LXC507&P=ML
http://www.sears.com/sr/javasr/produ...cemldffidfjm.0
maybe just maybe one of these
http://www.sears.com/sr/javasr/produ...TOOL&ihtoken=1
http://www.sears.com/sr/javasr/produ...cemldffidfjm.0
Are there any other ones that are good and strong. I like craftsman, but this is rc. I would also like variable speed and cordless. The main one though is cordless.
This one doesn't look very bad http://www2.towerhobbies.com/cgi-bin...&I=LXC507&P=ML
#2
Senior Member
Join Date: Oct 2005
Location: San Diego,
CA
Posts: 11,943
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
This one doesn't look very bad http://www2.towerhobbies.com/cgi-bin...&I=LXC507&P=ML
#4
Senior Member
![Default](images/icons/icon1.gif)
You simply can't go wrong with the good old [link=http://www.amazon.com/Dremel-3956-02-MultiPro-Variable-Accessories/dp/B00006JSPB]Dremel MultiPro[/link]. You can get it anywhere, it comes in a bunch of different packages, there a lot of accessories made to fit it, and it will do almost anything. I've had one for years now and I love it.
I've had cordless Dremels before, but I don't really like them. First, they only have a few speeds at best, while the corded MultiPro is fully variable. Second, corded tools don't run out of juice on you in the middle of a cut. Third, corded tools have much higher available speeds, making them ideal for tasks such as cutting metal.
I've had cordless Dremels before, but I don't really like them. First, they only have a few speeds at best, while the corded MultiPro is fully variable. Second, corded tools don't run out of juice on you in the middle of a cut. Third, corded tools have much higher available speeds, making them ideal for tasks such as cutting metal.
#5
![](/forum/images/badges/premium_member.png)
Join Date: Nov 2005
Location: Lakeside,
ON, CANADA
Posts: 6,936
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
I would go with a corded one too. When I got mine it was on sale at Canadian tire for 15 bucks, its 10 speed and it came with a bunch of bits. Its not a namebrand dremel but it gets the job done. I think thery are 25 or 30 regular price.
#6
Senior Member
Join Date: Nov 2004
Location: Muskego,
WI
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Go to a local hardware store and see what they have, or a menards home depot whatever you have where you live. I have a ryobi rotary tool and it has variable speed etc. Got mine free from my grandpa so i can't help you there. I do like this one though because it has the flex shaft with it. Handy to get in small places. http://www.amazon.com/GMC-ART372-Var...7?ie=UTF8&s=hi
#7
Senior Member
Thread Starter
Join Date: May 2006
Location: Overland Park, KS
Posts: 4,885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
ORIGINAL: Taffey
You simply can't go wrong with the good old [link=http://www.amazon.com/Dremel-3956-02-MultiPro-Variable-Accessories/dp/B00006JSPB]Dremel MultiPro[/link]. You can get it anywhere, it comes in a bunch of different packages, there a lot of accessories made to fit it, and it will do almost anything. I've had one for years now and I love it.
I've had cordless Dremels before, but I don't really like them. First, they only have a few speeds at best, while the corded MultiPro is fully variable. Second, corded tools don't run out of juice on you in the middle of a cut. Third, corded tools have much higher available speeds, making them ideal for tasks such as cutting metal.
You simply can't go wrong with the good old [link=http://www.amazon.com/Dremel-3956-02-MultiPro-Variable-Accessories/dp/B00006JSPB]Dremel MultiPro[/link]. You can get it anywhere, it comes in a bunch of different packages, there a lot of accessories made to fit it, and it will do almost anything. I've had one for years now and I love it.
I've had cordless Dremels before, but I don't really like them. First, they only have a few speeds at best, while the corded MultiPro is fully variable. Second, corded tools don't run out of juice on you in the middle of a cut. Third, corded tools have much higher available speeds, making them ideal for tasks such as cutting metal.
#8
Senior Member
Join Date: Aug 2006
Location: Darien,
IL
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Well since craftsman is the creator of dremel, I got the Craftsman rotary tool kit with variable speed, 5000 to 35000 rpm. Very good and strong because it's corded. The cordless ones are not too powerful and they don't last too long.
#9
Member
Join Date: Feb 2005
Location: Lafond,
AB, CANADA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
ORIGINAL: chrobar
Well since craftsman is the creator of dremel, I got the Craftsman rotary tool kit with variable speed, 5000 to 35000 rpm. Very good and strong because it's corded. The cordless ones are not too powerful and they don't last too long.
Well since craftsman is the creator of dremel, I got the Craftsman rotary tool kit with variable speed, 5000 to 35000 rpm. Very good and strong because it's corded. The cordless ones are not too powerful and they don't last too long.
I would not get one of the off brand cheap models but save and spend the little extra on a genuine Dremel rotary tool, even their most basic unit. Sure, you can buy a cheap one for $25 but how cheap is it really when you have to replace it in a year? My first Dremel is 15 years old and still works fine. Just my 2 cents.
#10
Senior Member
Join Date: Aug 2006
Location: Darien,
IL
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
hey suzuki, dremel is just a branch of companies owned by craftsman. They are both companies but craftsman is the top one. Just like GM owns all the american auto makers. A dremel is just a rotary tool, and craftsman makes many of them.
#11
Senior Member
Join Date: Jan 2005
Location: Stockbridge,
GA
Posts: 8,275
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
You guys are funny.
First, GM does not own all the car companies in the US. There's also Ford and Chrysler although Chrysler is now owned by Daimler so maybe they're German now????
Dremel is owned by Bosch tools. The make some Craftsman tools for Sears but Sears does not own them - nor does Craftsman.
Sears has never really made much of their own stuff. Not power tools, not hand tools, not appliances and not electronics. They get major brands to make stuff and slap the Craftsman (or Kenmore) name on it, not the other way around.
To stay on topic, Get a true Dremel. They are the best and worth the money. I don't know how the newer cordless ones are but the older ones were not very good. Didn't hold a charge well, were not all that powerful and the batteries just flat died (as in needed replaced) too soon. They were very handy though.
First, GM does not own all the car companies in the US. There's also Ford and Chrysler although Chrysler is now owned by Daimler so maybe they're German now????
Dremel is owned by Bosch tools. The make some Craftsman tools for Sears but Sears does not own them - nor does Craftsman.
Sears has never really made much of their own stuff. Not power tools, not hand tools, not appliances and not electronics. They get major brands to make stuff and slap the Craftsman (or Kenmore) name on it, not the other way around.
To stay on topic, Get a true Dremel. They are the best and worth the money. I don't know how the newer cordless ones are but the older ones were not very good. Didn't hold a charge well, were not all that powerful and the batteries just flat died (as in needed replaced) too soon. They were very handy though.
#12
Senior Member
Join Date: Apr 2005
Location: Lisbon/Groton,
CT
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Go with the 10.8 volt lithium dremel. It kicks ass. Its not underpowered and since its lithium no memory build up. It has a LOT of power to it. I just picked one up a couple weeks ago at sears.
#13
Senior Member
Thread Starter
Join Date: May 2006
Location: Overland Park, KS
Posts: 4,885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
WEll my dad just happened to have some 5 year old cordless dremel. I am going to try it out tomorrow. I probably will get a li-ion one soon though.
#14
Senior Member
My Feedback: (1)
Join Date: Aug 2005
Location: , TX
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
i found a kawasaki spiral saw at sams club for $41. it is by far the largest kit i've ever seen. works like a champ. comes with like 225 bits (cutting and polishing), variable speed, and is an awsome green color. its only a 1amp, but works as good as any of the higher end brands. if you can, check it out.
#15
Senior Member
My Feedback: (24)
Join Date: Nov 2004
Location: fairfax,
VT
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
i bought a Black-n-Decker rotary tool. it is every bit as good as the Dremmel and was about $20 cheaper.
http://www.blackanddecker.com/Produc...Path=1496.1508
i had the cordless dremmel. it was very handy but as everyone says not very powerful and the batteries run out. plus you only get one battery which means you have to wait. i ended up modding mine to hook to a hobby grade 7.2v battery pack since the dremmel battery was also 7.2v. i had 3 or 4 of these batteries and their charger is much quicker.
http://www.blackanddecker.com/Produc...Path=1496.1508
i had the cordless dremmel. it was very handy but as everyone says not very powerful and the batteries run out. plus you only get one battery which means you have to wait. i ended up modding mine to hook to a hobby grade 7.2v battery pack since the dremmel battery was also 7.2v. i had 3 or 4 of these batteries and their charger is much quicker.
#16
Member
Join Date: Dec 2006
Location: Indian Wells, CA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
+1 on corded -- a cordless one will die when you really don't want it to. plus it's only at its best on a full charge, then it loses its torque and speed, and therefore, it's cutting ability shortly after.
i have the dremel XPR400 -- it's a dream.
i have the dremel XPR400 -- it's a dream.
#17
Senior Member
Join Date: Apr 2005
Location: Lisbon/Groton,
CT
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
The lithium one doesn't bog down or loose power after a full charge like nicd or nimh batterys. Its rated at 10.8 volts Ive used it for well over 1 hour non stop at full speed. It got warm but it still had about 5/8 battery life left.
#18
Senior Member
Thread Starter
Join Date: May 2006
Location: Overland Park, KS
Posts: 4,885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
The 5 yr old one I am using is working great, and after only charging it for 1/3 of how long its supposed to charge, it lasted ofr 20 mins easily. It still had power left, I was jus done with it by then.