Help with my rs4 3 rtr
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: Richmond,
VA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
I need help with my rs4 3 rtr. After I go full throttle then let off the engine revs up for a second before it goes to idle. How do I fix this? Also what should I set my needle settings to?
#2
Senior Member
Join Date: May 2006
Location: BC, CANADA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Could be your carb throttle arm is stuck. Do you have a rotary type carb? I had a problem with mine getting stuck too because the linkages were binding so I'd check for this.
#3
Junior Member
Thread Starter
Join Date: Jul 2006
Location: Richmond,
VA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
ORIGINAL: _RC_PiNYoT_
Could be your carb throttle arm is stuck. Do you have a rotary type carb? I had a problem with mine getting stuck too because the linkages were binding so I'd check for this.
Could be your carb throttle arm is stuck. Do you have a rotary type carb? I had a problem with mine getting stuck too because the linkages were binding so I'd check for this.
#4
Senior Member
![Default](images/icons/icon1.gif)
sounds like you are running lean, richen the hsn up a little bit, als do a search on tuning, you will find some articles, there is no set place for the needles to always stay at
#5
Junior Member
Thread Starter
Join Date: Jul 2006
Location: Richmond,
VA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
I wanted to know what the factory needle settings are. And the high speed is already rich. It's spitting out alot of raw fuel out of the exhaust. It pours out of the exhaust it's so rich.