used mip cvd t maxx
06-16-2007, 04:51 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
used mip cvd t maxx
ok i can get some used mip cvd for a t maxx are these any good? and is it worh getting used ones?
thank you
thank you
06-16-2007, 05:01 PM
#2
Senior Member
RE: used mip cvd t maxx
If you get used ones , just make sure the ball cups aren't worn down. MIP is kinda expensive and you can get the same quality with other name brands.
06-16-2007, 05:09 PM
#3
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: used mip cvd t maxx
ORIGINAL: NitroVenom
If you get used ones , just make sure the ball cups aren't worn down. MIP is kinda expensive and you can get the same quality with other name brands.
If you get used ones , just make sure the ball cups aren't worn down. MIP is kinda expensive and you can get the same quality with other name brands.
ok thank you have you got a picture of the ball caps i am not sure what part that is lol
also if i get them should i grease them up or anything
thank you
06-16-2007, 05:21 PM
#4
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: used mip cvd t maxx
these are the cvd that the guy is on about he says they onlt fit the 2.5 though i thought the t maxx 3.3 and 2.5 are the same size though
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXDXN7]http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXDXN7[/link]
[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXDXN7]http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXDXN7[/link]
06-16-2007, 05:46 PM
#6
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: used mip cvd t maxx
ORIGINAL: NitroVenom
The drive cups(I said it wrong) are the black peices that the chrome shaft go in to. I've seen them wear down after a while.
The drive cups(I said it wrong) are the black peices that the chrome shaft go in to. I've seen them wear down after a while.
ok thank you but the guy told me that they are for the 2.5 only and that they wont fit on th t maxx 3.3
06-16-2007, 05:52 PM
#7
Senior Member
RE: used mip cvd t maxx
I own a revo so im not to familier with the t-maxx. Unless the 3.3 is wider then the 2.5 I don't see a reason why they wont work?... maybe ask the guy why hey don't work.
06-16-2007, 05:54 PM
#8
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: used mip cvd t maxx
ORIGINAL: NitroVenom
I own a revo so im not to familier with the t-maxx. Unless the 3.3 is wider then the 2.5 I don't see a reason why they wont work?... maybe ask the guy why hey don't work.
I own a revo so im not to familier with the t-maxx. Unless the 3.3 is wider then the 2.5 I don't see a reason why they wont work?... maybe ask the guy why hey don't work.
im not sure either the t maxx 3.3 is the same width as the revo
06-17-2007, 12:26 PM
#11
Senior Member
Join Date: Aug 2006
Location: Auburn,
WA
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
RE: used mip cvd t maxx
they will fit fine, the only difference between the 2.5 and 3.3 arms is that the 3.3 arms are made to fit the thicker revo universals, they aren't wider. and IMO MIP CVD's are the BEST, except in the revo, because their design allows the pins to fall out somewhat easily. they are made out of much higher quality materials than most other brands, though they are a bit more expensive.
06-17-2007, 01:40 PM
#12
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: used mip cvd t maxx
ORIGINAL: BRUSHLESS BASHER
they will fit fine, the only difference between the 2.5 and 3.3 arms is that the 3.3 arms are made to fit the thicker revo universals, they aren't wider. and IMO MIP CVD's are the BEST, except in the revo, because their design allows the pins to fall out somewhat easily. they are made out of much higher quality materials than most other brands, though they are a bit more expensive.
they will fit fine, the only difference between the 2.5 and 3.3 arms is that the 3.3 arms are made to fit the thicker revo universals, they aren't wider. and IMO MIP CVD's are the BEST, except in the revo, because their design allows the pins to fall out somewhat easily. they are made out of much higher quality materials than most other brands, though they are a bit more expensive.
ok thank you i think i m going to buy some new tsais dogbonez now
