50cc Yak Kit Suggestions?
#1
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Jul 2005
Location: Vancouver,
WA
Posts: 2,138
Likes: 0
Received 0 Likes
on
0 Posts
50cc Yak Kit Suggestions?
Curious if anyone has suggestions for a good quality 50cc Yak kit? Looking to build a Yak I can power with the Brillelli 46GT. Was planning on a Midwest Cap 232 but after talking to someone, that kit's no longer something I plan to build.
Appreciate any input!
somegeek
Appreciate any input!
somegeek
#4
Senior Member
My Feedback: (42)
Join Date: Jan 2004
Location: Ormond Beach, FL
Posts: 2,422
Likes: 0
Received 0 Likes
on
0 Posts
RE: 50cc Yak Kit Suggestions?
Here is one that is promising, I have just been following the thread.
http://www.rcuniverse.com/forum/m_6247068/tm.htm
16 lb 6 oz with DA-50 and dual NIMH. With your 46 should be able to get in the upper 15 lb range. Will the 46 fly a plane that weighs mid or upper 16's on takeoff?
A trick setup might be the 46 on a CF pipe flying this 87 inch plane. Or you could just trade up to 50cc to be shure.
http://www.rcuniverse.com/forum/m_6247068/tm.htm
16 lb 6 oz with DA-50 and dual NIMH. With your 46 should be able to get in the upper 15 lb range. Will the 46 fly a plane that weighs mid or upper 16's on takeoff?
A trick setup might be the 46 on a CF pipe flying this 87 inch plane. Or you could just trade up to 50cc to be shure.
#5
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Jul 2005
Location: Vancouver,
WA
Posts: 2,138
Likes: 0
Received 0 Likes
on
0 Posts
RE: 50cc Yak Kit Suggestions?
Pondering the CA Models 27% Extra 300L if I can't find a light Yak kit to build. Brillelli said that the Extreme Flight Yak can come in around 13lbs with this engine and it's got great vertical... though that's an ARF and I'd like to build a kit Yak. The Brillelli 46 is a sweet engine... would like to build a yak or extra to pull with it.
somegeek
somegeek