superman11

My Feedback: (1)

I am having trouble with my truck recently and I need to know how to remove the old wire and install a new one. Thank you

ralph2112

It should have an inline connector on it on your quick start wire harness the blue wire just pull them apart. then connect the new one.

ralph2112

BY the way what wire are you talking about?

ralph2112

never mind you were talking about the glow plug wire.[:@]

revo-nation

when you buy a new wire it will come with a tool to take the wire out of the harness.
after that just pull the blue wire apart from the rest of the harness and it should be pinned down by the shock mount
now remove your shock mount (from the under side) and that will free the glow wire
replace wire or you can trash the easy start and go with a roto start with a glow plug ingitor.
check that out on ebay
roto start
glow plug ignitor
and a back plate for roto start
way more power for turning motor over and NO MORE WIRES

Skimore69

lol i just bought roto start and was having such a hard time getting the wires out of the i just cut them all off [sm=wink_smile.gif]