pull - pull set up aluminum bellcrank
#1
Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: hanmer, ON, CANADA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
pull - pull set up aluminum bellcrank
Hello Guys i got a concern about aluminum bellcrank coupled to a steel clevis on a pull pull set up if this will generate noise for the receiver ?Bellcrank will be operated by a short heavy duty bar connected to a nylon servo arm .
#2
Senior Member
pull - pull set up aluminum bellcrank
I use an aluminum bellcrank for the all-moving horizontal on my Balsa USA Eindecker.
There's that with the steel pushrod and clevis, and 6 steel cables (4 for the horizontal, 2 for the vertical) running to the rear of the plane, with the aerial there also.
No problems.
There's that with the steel pushrod and clevis, and 6 steel cables (4 for the horizontal, 2 for the vertical) running to the rear of the plane, with the aerial there also.
No problems.