Mix Free IMAC planes for G3.5
#1
Member
Thread Starter
Join Date: Mar 2005
Location: Lincoln,
NE
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Mix Free IMAC planes for G3.5
I have downloaded many planes for my g3.5 sim, but it all of the them have mixing issues like rudder to elevator/rudder to aileron, and as I’m trying to practice IMAC sequences (I’m just getting into the whole IMAC thing) I feel like I’m teaching myself bad habits as I have to manually correct for the aircraft pulling in KE while doing pt and slow rolls. I was just wondering if anybody had any suggestions as to where or how I might be able to download an IMAC plane to my sim that would fly just like one in a competition, which would be w/ my X9303 having mixed out all the bad traits and everything. Any suggestions would be great.
Thanks
Thanks
#3
Senior Member
RE: Mix Free IMAC planes for G3.5
I agree.
I've found that "practicing" with some models is not a good thing with the provided Interlink controller. If I use the switches on my JR8303 when flying the model, I really don't get good practice using the Interlink.
The Interlink only has one dual rate switch and that blows it right there. I use elevator and rudder dual rate switches in flight on a couple of my airplanes.
I've found that "practicing" with some models is not a good thing with the provided Interlink controller. If I use the switches on my JR8303 when flying the model, I really don't get good practice using the Interlink.
The Interlink only has one dual rate switch and that blows it right there. I use elevator and rudder dual rate switches in flight on a couple of my airplanes.
#4
Join Date: Jun 2005
Location: North Port, FL
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mix Free IMAC planes for G3.5
see this . . . http://www.knifeedge.com/forums/showthread.php?t=19840