RACER7696

My Feedback: (3)

Does Anyone have any suggestions for a good fit for the 26 gt2 made by evolution?

Bill Martins

I recently started flying the new Cermark Edge 540T, 70in WS, 1008 sq in. Mine came in at 10 LBS with a GF26i gasser and it flys great. 3D and pullout of a hover with authority.

I know the EVO will be more powerful.

Here's the link.

http://www.cermark.com/index.html

It's in the "Glow/Gas Airplanes" drop down on left side of the screen. 540T is the bottom plane choice.

I also have the Extra 260 and it flys well too.

Here is a pic of the Edge.

Bill

Whistling Death

What are you looking for specifically? 3D, warbird, etc.

69 roadrunner

Will this engine fly a plane that weight is around 13Lbs or is that to heavy. I dont do a lot of three D more IMAC style fling. Thanks steve

pe reivers

I used this engine in a tow plane of 16 lbs, with gliders up to 12 lbs for a total combo weight up to 28 lbs with good results.
In piggy-back flights, 22 lbs was still excellent.
The 16 lbs tow plane was capable of all aerobatics that the Clark-Y airfoil would allow, including negative G loops, until the wing struts collapsed. Exit one fine tow plane.

RACER7696

My Feedback: (3)

I am looking for a good all around sport plane with some 3d and some imac miixed in ,but mainly all around acro and sport flying.

pe reivers

Aim for 12 lbs max weight, with the engine on tuned pipe. With the side muffler, max weight should be 10 lbs if 3D still must be an option.