Help with battery please!!!!!!!!
#1
Member
Thread Starter
Join Date: Feb 2008
Location: Santo Domingo, DOMINICAN REPUBLIC
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Help with battery please!!!!!!!!
Hi guys!
I have 2 Brand new DTX 4200mAh NiMHs batteries and I use the Hobbico Accu-Cyle pro series Elite charger.
The thing is that I need a good set-up for this charger to use on this batteries
This is the current Set-up but its not working at all!
PEAK CHARGE
peak charge current 1.70A
Trickle current: 90mA
Peak sensitivity: 8mV/Cell
DISCHARGE 6.6V
Dischg current 0.30A
dsch cutt 1.1V/cell
CYCLING
Cycling charge 1.70A
Cycling Discharge 0.30A
Discharge cutt off 1.1V/cell
number of cycles: 1
Thanks alot guys!
I have 2 Brand new DTX 4200mAh NiMHs batteries and I use the Hobbico Accu-Cyle pro series Elite charger.
The thing is that I need a good set-up for this charger to use on this batteries
This is the current Set-up but its not working at all!
PEAK CHARGE
peak charge current 1.70A
Trickle current: 90mA
Peak sensitivity: 8mV/Cell
DISCHARGE 6.6V
Dischg current 0.30A
dsch cutt 1.1V/cell
CYCLING
Cycling charge 1.70A
Cycling Discharge 0.30A
Discharge cutt off 1.1V/cell
number of cycles: 1
Thanks alot guys!
#3
My Feedback: (11)
Join Date: Oct 2002
Location: Northridge, ON, CANADA
Posts: 4,419
Likes: 0
Received 1 Like
on
1 Post
RE: Help with battery please!!!!!!!!
I would adjust the peak charge current up between 4 and 5 amps. At 1.7 amp charge rate, it will take over 3 hours to charge one battery pack. Everything else looks good.