RC10-gt Rear toe ? & shocks
05-25-2003, 04:53 PM
#1
Member
Thread Starter
Join Date: Sep 2002
Location: TX
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
RC10-gt Rear toe ? & shocks
Ok , ive just jumped out of planes & into Rc Trucks, Ive got
a RC-10 Gt Factory team edition. The rear toe is 4.5 degrees total, 3 degrees for mounts and 1.5 for hub cariers. Ive ran car, I race offroad & im new, need lots of practice., It seems like its pushing alots. If i get the 0 degree hub carriers witch brings me down to 3 degrees total toe in for rear will that help that much.
Meaning good bit of difference or not? Next , what is a good combo for shocks for off road Piston holes & shock oil weight. Im using Silvers in rear & greens up front , Thats what every one else uses at my track . Keep in mind i like to power through the corners. need front to bite . I use "PRO LINE EDGE" front, & "LOSSEY STEPPINS" rear .Any help would be greatly appreciated.
a RC-10 Gt Factory team edition. The rear toe is 4.5 degrees total, 3 degrees for mounts and 1.5 for hub cariers. Ive ran car, I race offroad & im new, need lots of practice., It seems like its pushing alots. If i get the 0 degree hub carriers witch brings me down to 3 degrees total toe in for rear will that help that much.
Meaning good bit of difference or not? Next , what is a good combo for shocks for off road Piston holes & shock oil weight. Im using Silvers in rear & greens up front , Thats what every one else uses at my track . Keep in mind i like to power through the corners. need front to bite . I use "PRO LINE EDGE" front, & "LOSSEY STEPPINS" rear .Any help would be greatly appreciated.
05-25-2003, 07:21 PM
#2
Senior Member
My Feedback: (2)
Join Date: Feb 2003
Location: staten island , NY
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
RC10-gt Rear toe ? & shocks
maybe since you just got into rc cars its the driver not the car?
what kinda surface you running on? well anyway here is a link to rc10gt setup's from various drivers at various tracks, so hopefully you can match your track to one of these and try it out.
when it comes to dialing in suspension im not the best at it and only just begun. we dont have a track here so i have no real reason to do it except help with my bashing fun.
heres another link. you might need it you might not but here goes.
http://www.rcnitro.com/rn/articles/ht_camber.asp
what kinda surface you running on? well anyway here is a link to rc10gt setup's from various drivers at various tracks, so hopefully you can match your track to one of these and try it out.
when it comes to dialing in suspension im not the best at it and only just begun. we dont have a track here so i have no real reason to do it except help with my bashing fun.
heres another link. you might need it you might not but here goes.
http://www.rcnitro.com/rn/articles/ht_camber.asp
