Picco .26 Max
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Jackson,
MI
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Picco .26 Max
Is there anything i need to do to drop a Picco .26 into my T-Maxx 2.5, such as trans??? Or clutch??? The Ezee start bolts right up right.
#3
Senior Member
Join Date: Jul 2008
Location: Akron,
OH
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
RE: Picco .26 Max
yes the JL red dot is BETTER...
you will need a new mount (ofna engine mount), might wanna upgrade your clutch while you have it apart (maybe a 3 shoe, 3 pin setup) and the tranny SHOULD be OK for quite a while... other than that, you should be good to go. good luck with it.
you will need a new mount (ofna engine mount), might wanna upgrade your clutch while you have it apart (maybe a 3 shoe, 3 pin setup) and the tranny SHOULD be OK for quite a while... other than that, you should be good to go. good luck with it.
#5
Senior Member
Join Date: Jul 2008
Location: Akron,
OH
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
RE: Picco .26 Max
Picco .26 Max
Size .26 cu in (4.2cc)
Horsepower: 2.5
RPM: 32000
Crankshaft: SG (pilot)
Piston and Liner Construction: ABC
Exhaust: Rear
Ports: 5
Picco .26 Max JL Red Dot
Displacement: .26 cu in (4.27cc)
Horsepower: 2.7
Stroke: 16mm
Bore: 18.2mm
RPM: 34000
Weight: 11.2oz (320g)
Crankshaft: SG (pilot)
Exhaust: Rear
[link=http://www.ofna.com/engines.html]Picco Engines[/link]
The Red Dot is the Ofna 'Featured Engine of the Month'...
They are very similar, but some will say that the Red Dot is better. In my opinion, when I go to upgrade, the Red Dot will be for me.
Size .26 cu in (4.2cc)
Horsepower: 2.5
RPM: 32000
Crankshaft: SG (pilot)
Piston and Liner Construction: ABC
Exhaust: Rear
Ports: 5
Picco .26 Max JL Red Dot
Displacement: .26 cu in (4.27cc)
Horsepower: 2.7
Stroke: 16mm
Bore: 18.2mm
RPM: 34000
Weight: 11.2oz (320g)
Crankshaft: SG (pilot)
Exhaust: Rear
[link=http://www.ofna.com/engines.html]Picco Engines[/link]
The Red Dot is the Ofna 'Featured Engine of the Month'...
They are very similar, but some will say that the Red Dot is better. In my opinion, when I go to upgrade, the Red Dot will be for me.
#6
Senior Member
Join Date: Jul 2008
Location: Akron,
OH
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
RE: Picco .26 Max
Just a little bit more info about the Red Dot
Designed to Fit All T-Max and Revo Applications
Modified Crank
JLR Red-Dot Technology
CNC Cooling Head
Timing has been Changed to Create More Top End
Designed to Fit All T-Max and Revo Applications
Modified Crank
JLR Red-Dot Technology
CNC Cooling Head
Timing has been Changed to Create More Top End
#10
Senior Member
RE: Picco .26 Max
ORIGINAL: TMaxxDriver
depends... Trinity, Buku, THS - to name a few popular ones.
depends... Trinity, Buku, THS - to name a few popular ones.
#11
Member
Join Date: Feb 2008
Location: , OH
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
RE: Picco .26 Max
i just got my jl red dot on sat..just got my fuel today.i have a ths pipe.but iam gonna order the buku pipe this week.cant wait to fire it up..get the red dot.it will be a beast...