Falcon 40 Head Assembly
08-30-2007, 01:58 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Coweta,
OK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Falcon 40 Head Assembly
I have tried Exceed for an exploded diagram. I am afraid that I won't be able to put the blade holders. I have plenty of parts, but the bearings do not want to slip into the top blade holder. What am I missing. I was having alot of fun of the fixed pitch heli, but since I am a newbie I picked a model that was down on the list as far as popularity list.
Please help me either by instruction or better yet a photo. I understood from another post that the Night Ranger is very similar, but after reviewing it I want to see the Exceed Falcon 40.
I am new to this forum, in fact to any forum.
Thank You!
Please help me either by instruction or better yet a photo. I understood from another post that the Night Ranger is very similar, but after reviewing it I want to see the Exceed Falcon 40.
I am new to this forum, in fact to any forum.
Thank You!
08-30-2007, 02:58 PM
#2
Senior Member
Join Date: Jan 2007
Location: Sometown, Northern Utah
Posts: 4,432
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon 40 Head Assembly
your answer is somewhere in this thread with good photos =) Not sure where though.
http://www.rcuniverse.com/forum/m_48...page_81/tm.htm
you could ask a couple of q's or search through there.
GL, and welcome to RCU =)
http://www.rcuniverse.com/forum/m_48...page_81/tm.htm
you could ask a couple of q's or search through there.
GL, and welcome to RCU =)
08-30-2007, 04:46 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Coweta,
OK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon 40 Head Assembly
Believe it or not, I have never used a forum. I will poke around this evening, but any help in searching would greatly be appreciated.
Thank you,
Roger A. Morrow
Thank you,
Roger A. Morrow
09-01-2007, 03:14 PM
#4
Join Date: Jan 2007
Location: West Islip N.Y.
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon 40 Head Assembly
ORIGINAL: ramorrow
I have tried Exceed for an exploded diagram. I am afraid that I won't be able to put the blade holders. I have plenty of parts, but the bearings do not want to slip into the top blade holder. What am I missing. I was having alot of fun of the fixed pitch heli, but since I am a newbie I picked a model that was down on the list as far as popularity list.
Please help me either by instruction or better yet a photo. I understood from another post that the Night Ranger is very similar, but after reviewing it I want to see the Exceed Falcon 40.
I am new to this forum, in fact to any forum.
Thank You!
I have tried Exceed for an exploded diagram. I am afraid that I won't be able to put the blade holders. I have plenty of parts, but the bearings do not want to slip into the top blade holder. What am I missing. I was having alot of fun of the fixed pitch heli, but since I am a newbie I picked a model that was down on the list as far as popularity list.
Please help me either by instruction or better yet a photo. I understood from another post that the Night Ranger is very similar, but after reviewing it I want to see the Exceed Falcon 40.
I am new to this forum, in fact to any forum.
Thank You!
09-01-2007, 10:32 PM
#5
Senior Member
Join Date: Jan 2007
Location: Sometown, Northern Utah
Posts: 4,432
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon 40 Head Assembly
ORIGINAL: ramorrow
Believe it or not, I have never used a forum. I will poke around this evening, but any help in searching would greatly be appreciated.
Thank you,
Roger A. Morrow
Believe it or not, I have never used a forum. I will poke around this evening, but any help in searching would greatly be appreciated.
Thank you,
Roger A. Morrow
yeah, just go to that link I sent you, type in your q, and they'll be glad to answer it =)
