boat stand modification
#1
Senior Member
Thread Starter
Join Date: Dec 2008
Location: Broken Hill, AUSTRALIA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
boat stand modification
Hi,
I've been making boat stands for each boat as it comes alone and I came up with these idea's. I thought they are worth sharing....
A tee piece added onto the end with a screw on end which is good for storing and carting your flex shafts and stuffing tube liners down to the water.
The second tube is for cleaning flex shafts, half fill tube with cleaning liquid, screw on the end and shake....presto, a clean flex ready for re greasing
Cheers Scoot
I've been making boat stands for each boat as it comes alone and I came up with these idea's. I thought they are worth sharing....
A tee piece added onto the end with a screw on end which is good for storing and carting your flex shafts and stuffing tube liners down to the water.
The second tube is for cleaning flex shafts, half fill tube with cleaning liquid, screw on the end and shake....presto, a clean flex ready for re greasing
Cheers Scoot
#3
Member
Join Date: Feb 2009
Location: broken hill, , AUSTRALIA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: boat stand modification
Hey Scoot Bubbles will look so nice sitting on that fancy stand, yes mate I have come over from OSE to see what you Gas Guys get up to when high on hydrocarbon fumes!!!!!
#4
Senior Member
Join Date: Jan 2005
Location: blackpool, UNITED KINGDOM
Posts: 11,390
Likes: 0
Received 2 Likes
on
2 Posts
RE: boat stand modification
Nice simple idea Scoot,ive been using the single tube idea to store all my flex shafts when not in use ,i fill it with engine oil and screw on the cap and leave it hung in the shed to keep them all niceley lubed for when i next need them.
Mart
Mart