sikk timing on a zenoah
#1
Thread Starter
Join Date: Jan 2009
Location: cape townwestern province, SOUTH AFRICA
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
sikk timing on a zenoah
hallo guys. i am running a 25.4 sikk motor and are happy with its performance buttt i had my off days[:@] due to some failure issues. i bought my self a standard zenoah and want to start toggel it a bitt . how much performance should i get if i do coppy the timing from the sikk and cut the zenoah the same. we do figure m coarse racing and i do need a motor with good throttel response. if i go with exhaust 178*and the inlet 155* what hp rating should i have. any suggetions is welcome.
#2
Senior Member
Join Date: Nov 2005
Location: perth, AUSTRALIA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
RE: sikk timing on a zenoah
http://www.modelgasboats.com/Magazin...ngine_Porting/
just do the same as that and it will run better than the cy engine
just do the same as that and it will run better than the cy engine
#3
Senior Member
Join Date: Feb 2008
Location: Old Hangtown ,
CA
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: sikk timing on a zenoah
ORIGINAL: wet a wild
hallo guys. i am running a 25.4 sikk motor and are happy with its performance buttt i had my off days[:@] due to some failure issues. i bought my self a standard zenoah and want to start toggel it a bitt . how much performance should i get if i do coppy the timing from the sikk and cut the zenoah the same. we do figure m coarse racing and i do need a motor with good throttel response. if i go with exhaust 178*and the inlet 155* what hp rating should i have. any suggetions is welcome.
hallo guys. i am running a 25.4 sikk motor and are happy with its performance buttt i had my off days[:@] due to some failure issues. i bought my self a standard zenoah and want to start toggel it a bitt . how much performance should i get if i do coppy the timing from the sikk and cut the zenoah the same. we do figure m coarse racing and i do need a motor with good throttel response. if i go with exhaust 178*and the inlet 155* what hp rating should i have. any suggetions is welcome.
* Do use the link provided [:@] ..... You will be quite happy with the results