savageed

Just bouhgt a 1/8 grave digger body for my savage x it seems to be a little big and my rear post wont reach the top of the body any ideas where i can find post to make it work or how to fix it . Thanks Alot

Revomad1

Your Savage should have come with a taller rear body mount that will allow you to use tall bodies.

t9dragon

My Feedback: (11)

Unless he bought a used Savage....

Revomad1

The long body mount is on the right in this pic. Unfortunately, it looks like you have to buy the bumpers too to get the long mount.
http://www3.towerhobbies.com/cgi-bin...&I=LXDLC9&P=ML

savageed

Thanks Alot for the input found that out shortly after the post</p>

black mamba

ebay.....Savage body mounts galore there.

TAKZILLA

the HPI part #85059
that is the part # for just the tall body mount [sm=wink_smile.gif]

sicira

hi,
i have a 1/8 scale savage x and with the grave digger body and tubed neon green frame and the led red lights. does anyone know where i can get a skull flag that will fit to complete my grave digger i need a flag

rclugnut10

My Feedback: (1)

i'd just get a dowel and print out some flags to your liking lamante or cover in tape and mount up

the lug

sicira

on the savage x what is the factory settings tune for the carb. mine runs great but sometimes i get it out of

t9dragon

My Feedback: (11)

The manual should have the factory setting in it.