phmaximus

hey guys, my stock clutch in my revo is starting to slip & needs replaceing, But im unsure what clutch to get? im intrested in the alloy ones but dont know anything about them. Then againe i wouldent mind trying one with a stronger spring


whats the best??? only post from first hand experence, not really intrested in what your mate uses, or a mate of a mate

Snook Man

<p class="MsoNormal" style="MARGIN: 0in 0in 0pt"><span style="FONT-FAMILY: Arial; FONT-SIZE: 9pt">The stock shoes in the leading edge orientation work well for me with the 3.3. as long as your not running large heavy wheels/tires.
The MIP 2 shoe clutch is a direct replacement for the factory shoes and work well with the 3.3 in the leading edge orientation as well.

With any engine larger or that’s putting out more torque than the 3.3 its wise to invest in a 3 shoe 1/8th scale setup. Aluminum shoes require more maintenance then carbon shoes do but grip very well when they get some heat in them.</span></p>

MaddMatt

I use a 3 shoe adjustable clutch shoe set up from NOva rc.. works great!

ArloRogers

My Feedback: (1)

One of the few topics were you wont get beat up for suggesting Integy. Thier 3 pices Aluminum Clutch works well with the 3.3.

absolutemayhem

stick with the stock clutch...i use it with my revo big block and it hold up good. very little slip and it last a long time...alum. shoes are nice, but they require more maintenance and dont last as long..also they are more expensive.

piddlefoot

My spring broke and the pads come of the two pins that hold em in on the standard revo clutch. There junk.
Get a 3 shoe, plastic or alloy, l preffer plastic ones, and they last forever. Well not forever ever but u get it.

Mopar Or Nocar

Do not get the integy clutch shoes... they get ate up real bad...

bigtrucker2007

my 3.3 smaxx keeps breaking clutch springs I need help

Mr Max Wheelie

lol 6 responses all with different answers......nice!.......from myexperience with a 3piece aluminum clutch on my buddies revo bb losi 427,it lasted about 20 mins.huge waste of money! ive never heard anything bad about an MIP clutch......ive never even seen or heard about a plastic clutch,so i have no comment on that......a guy at my hobby store told me i should switch to a 1/8scale HPI clutch and fly wheel when i start running the picco .26 in my tmaxx.....and if none of this helps my best words of advice is to listen to snookman (he seems to know his s%#t)

phmaximus

thanks m8 yeah snook mans post seems the most usefull

ok im thinking about getting the MIP1664 clutch $14 sounds good

Revy

My Feedback: (1)

Snook rocks!

I'll add that I had an MIP and it suckt. More brittle than a stocker, in my experience with the one I had. Got a Werks Racing 4 shoe rulon shoed and I like it a lot! A bit of a pain to set up, a tad on the pricey side but it stays set-up for quite a few visits to the track. I have yet to replace the shoes.