rctom

Absolutely not. Just make sure it's not too lean and that it runs reliably then fly it.

TF

Grotesquebass

My Feedback: (16)

Snapped a pic of patty's 260 when i was at the smithsonian

wowie

What kind of pushrods are you guy's using on your control surfaces? And what type of fittings are you using on the ends to connect to the surfaces? I'm using the SWB aluminum servo arms and would really like to see some pictures of some of the pushrod setups you guy's are using. I've been doing a little research and came across some pushrods from Central Hobbies and they sell what looks to be a very nice setup. They come with special titanium rod ends which can be bought with 4-40 threads, 2-56 threads, 6-32 threads and a few others with metric threads. They come with carbon fiber tubing and the special rod ends get glued in to the carbon fiber tube. You can cut the tubing to whatever lenght you need for the particular control surface your working on. It looks like a nice system but I wanted to get some opinions from you guy's first before I commit to buying it. I also heard of some guy's using the Hanger 9 Pro Links and I'd like to get some of you guy's to comment on them. What do you guy's use? I going to be putting together the "Vertigo Edge540T" and I'll be powering it with the DL50. This will be my first large scale build and I'd really like to get some input from you guy's if you can find the time. Also if any of you could include some pictures of your linkages that would be great. Thanks guy's.

Regards,,,,Phil