gonggongboy

I recently bought a Racer's Edge extended chassis. My problem is i cant find braces that will fit. The stock Tmaxx 3.3 braces are to short.

Please help

I can get pictures if you need to see whats going on.

mmtecg

Yes if you could get those photos.

gonggongboy

Hope this helps, its just showing its a little short

rangerfredbob

My Feedback: (13)

tried a front skidplate in the rear? that's what I did to extend mine then made a plate for the top (it's a basher, so it doesn't have to be perfect) but this might be what they did

gonggongboy

The holes the screws go through to bolt into the tranny dont match up with braces either so there must be braces out there that fit the chassis with out mods

gonggongboy

I have the older Tmaxx 3.3 i wonder if the new one has braces that will fit. Is there any after market ones people know of. LMK this is getting frustruating

bigdogkanicsar

i make custom chassis's and i would make a longer skid plate or like rangerfredbob said and try a front skid in the back.

Snook Man

If the stock chassis braces don't line up with the tranny mount holes in the chassis how will the tranny fit???

gonggongboy

What i need is different chassis braces. The stock ones that came with the Tmaxx wont fit and i cant find my chassis i bought on the RacersEdge website.

I have the older Tmaxx does the new Tmaxx have longer braces that might be what it needs.

Snook Man

I realise you need longer braces...But if the tranny mounting holes in the stock braces do not line up with the tranny holes in the chassis, the tranny will not line up either. Does the tranny line up with the chassis holes?

The longer t maxx chassis & braces (4908/4907) is extended in the front 30mm and just slightly 3mm in the rear.

gonggongboy

Yes the tranny lines up its just the braces. Ill bring it to my hobby store and see if they can fit the new Tmaxx braces on it.

Snook Man

s this the chassis?
http://www.racers-edge.com/product_p/rce4995cs.htm

gonggongboy

No mines a lightweight chassis. Its really open and its about 5-6mm thick and black.

Snook Man

If your sure its a Racers edge chassis ypou may need to call them to find the braces or skids you need.

gonggongboy

yea i may do that